Dell 1200MP Instrukcja obsługi

www.dell.com | support.dell.com

Dell™ 1200MP Projector

Owner’s Manual

Notes, Notices, and Cautions

NOTE: A NOTE indicates important information that helps you make better use

of your projector.

NOTICE: A NOTICE indicates either potential damage to hardware or loss of

data and tells you how to avoid the problem.

CAUTION: A CAUTION indicates a potential for property damage, personal

injury, or death.

____________________

Information in this document is subject to change without notice.

Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly

forbidden.

Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Inc.; DLP and

Texas Instruments are trademarks of Texas Instruments Corporation; Microsoft and Windows are

registered trademarks of Microsoft Corporation; Macintosh is a registered trademark of Apple

Computer, Inc.

Other trademarks and trade names may be used in this document to refer to either the entities

claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in

trademarks and trade names other than its own.

Model 1200MP

February 2006 P/N YF557 Rev. A00

Contents 3

Contents

1 Your Dell™ Projector

About Your Projector . . . . . . . . . . . . . . . 6

2 Connecting Your Projector

Connecting to a Computer . . . . . . . . . . . . . . 8

Connecting a DVD Player, Set Top Box, VCR, or TV

. . . 8

Connecting With a Component Cable

. . . . . . . 8

Connecting With an S-Video Cable

. . . . . . . . 9

Connecting With a Composite Cable

. . . . . . . 9

Connecting to a Wired RS232 Remote Control

. . . . . 10

Connecting to a Computer

. . . . . . . . . . . . 10

Connecting to a Commercial RS232 Control Box

. . 10

3 Using Your Projector

Turning Your Projector On . . . . . . . . . . . . . . . 11

Turning Your Projector Off

. . . . . . . . . . . . . . 11

Adjusting the Projected Image

. . . . . . . . . . . . 12

Raising the Projector Height

. . . . . . . . . . . 12

Lowering the Projector Height

. . . . . . . . . . 12

Adjusting Projection Image Size

. . . . . . . . . . . 13

Adjusting the Projector Zoom and Focus

. . . . . . . . 14

4 Contents

Password Security . . . . . . . . . . . . . . . . . 14

Using the Control Panel

. . . . . . . . . . . . . . . 16

Using the Remote Control

. . . . . . . . . . . . . . 17

Using the On-Screen Display

. . . . . . . . . . . . 18

Main Menu

. . . . . . . . . . . . . . . . . . . 19

All Images Menu

. . . . . . . . . . . . . . . . 19

Computer Image Menu

. . . . . . . . . . . . . 20

Video Image Menu

. . . . . . . . . . . . . . . 21

Audio Menu

. . . . . . . . . . . . . . . . . . 21

Management Menu

. . . . . . . . . . . . . . . 22

Language Menu

. . . . . . . . . . . . . . . . 24

Test Pattern Menu

. . . . . . . . . . . . . . . 24

Factory Reset Menu

. . . . . . . . . . . . . . 24

4 Troubleshooting Your Projector

Changing the Lamp . . . . . . . . . . . . . . . . . 28

5 Specifications

6 Contacting Dell

7 Glossary

Your Dell™ Projector 5

Your Dell™ Projector

Your projector comes with all the items shown below. Ensure that you have all the

items, and contact Dell if anything is missing. For more information see,

"Contacting Dell".

Package Contents

Power cable (1.8m) VGA cable (D-sub to D-sub) (1.8m)

S-Video cable (2.0m) USB cable (1.8m)

Composite cable (1.8m) VGA to component cable (1.8m)

RCA to audio cable (1.8m) Mini pin to Mini pin cable (1.8m)

www.dell.com | support.dell.com

6 Your Dell™ Projector

About Your Projector

Remote control Batteries

Carrying Case Documentation

1 Control panel

2 Zoom tab

3 Focus ring

4 Lens

5 Remote control receiver

6 Elevator button

Package Contents (continued)

1

2

3

4

5

6

Connecting Your Projector 7

Connecting Your Projector

1 IR receiver

2 VGA out (monitor loop-through)

3 USB connector

4 RS232 connector

5 VGA in (D-sub) connector

6 S-video connector

7 Composite video connector

8 Audio input connector

1

2 3

4

5

6

7

8

www.dell.com | support.dell.com

8 Connecting Your Projector

Connecting to a Computer

NOTE: The USB cable must be connected if you want to use the Next Page and

Previous Page features on the remote control.

Connecting a DVD Player, Set Top Box, VCR, or TV

Connecting With a Component Cable

1 Power cord

2 VGA to VGA cable

3 USB to USB cable

1 Power cord

2 D-sub to HDTV/Component cable

1

3

2

1

2

Connecting Your Projector 9

Connecting With an S-Video Cable

Connecting With a Composite Cable

1 Power cord

2 S-video cable

1 Power cord

2 Composite video cable

1

2

1

2

www.dell.com | support.dell.com

10 Connecting Your Projector

Connecting to a Wired RS232 Remote Control

NOTE: The RS232 cable is not provided by Dell. Consult a professional installer

for the cable and RS232 remote control software.

Connecting to a Computer

Connecting to a Commercial RS232 Control Box

1 Power cord

2 RS232 cable

1 Power cord

2 RS232 cable

3 Commercial RS232 control box

1

2

1

2

3

Using Your Projector 11

Using Your Projector

Turning Your Projector On

NOTE: Turn on the projector before you turn on the source (computer,

notebook, DVD, etc.). The Power button light blinks green until pressed.

1

Remove the lens cap.

2

Connect the power cord and appropriate cables. For information about

connecting the projector, see "Connecting Your Projector" on page 7.

3

Press the Power button (see "About Your Projector" on page 6 to locate the Power

button). The Dell logo displays for 30 seconds.

4

Turn on your source (computer, DVD player, etc.). The projector automatically

detects your source.

NOTE: Allow the projector some time to search for the source.

If the "Searching..." message appears on the screen, ensure that the

appropriate cables are securely connected.

If you have multiple sources connected to the projector, press the Source button

on the remote control or control panel to select the desired source.

Turning Your Projector Off

NOTICE: Unplug the projector after properly shutting down as explained in the

following procedure.

1

Press the Power button twice. The cooling fan continues to operate for 90 seconds.

2

Disconnect the power cord from the electrical outlet and the projector.

NOTE: If you press the Power button while the projector is running, the

following message appears:

" Press Power button to Turn Off Projector.

Projector must cool down for 90 seconds before

unplugging or restarting." The message disappears in 5 seconds or

you can press any button on the control panel to erase it.

www.dell.com | support.dell.com

12 Using Your Projector

Adjusting the Projected Image

Raising the Projector Height

1

Press the elevator button.

2

Raise the projector to the desired display angle, and then release the button to

lock the elevator foot into position.

3

Use the tilt adjustment wheel to fine-tune the display angle; if necessary, press the

side elevator buttons to raise the rear side of the projector to the desired display

angle.

Lowering the Projector Height

1

Press the elevator button.

2

Lower the projector, and then release the button to lock the elevator foot into

position.

1 Elevator button

2 Elevator foot

3 Tilt adjustment wheel

1

2

3

Using Your Projector 13

28.6"(72.6cm)

60.0"(152.4cm)

80.0"(203.2cm)

100.0"(254.0cm)

200.0"(508.0cm)

285.7"(725.7cm)

Projector to screen distance

3.3'(1.0m)

24.7"

(62.7cm)

51.9"

(131.7cm)

69.1"

(175.6cm)

86.4"

(219.5cm)

172.8"

(439.0cm)

246.9"

(627.2cm)

6.9'(2.1m)

9.2'(2.8m)

11.5'(3.5m)

23.0'(7.0m)

32.8'(10.0m)

Adjusting Projection Image Size

Screen

(Diagonal)

Max.

28.6" (72.6cm) 60.0"(152.4cm) 80.0"(203.2cm) 100.0"(254.0cm) 200.0"(508.0cm) 285.7"(725.7cm)

Min.

24.7"(62.7cm) 51.9"(131.7cm) 69.1"(175.6cm) 86.4"(219.5cm) 172.8"(439.0cm) 246.9"(627.2cm)

Screen

size

Max.

(WxH)

22.9"x58.1" 48.0"x121.9" 64.0"x162.6" 80.0"x203.2" 160.0"x406.4" 228.6"x580.6"

17.1cmx43.5cm 36.0cmx91.4cm 48.0cmx121.9cm 60.0cmx152.4cm 120.0cmx304.8cm 171.4cmx435.4cm

Min.

(WxH)

19.8"x50.2" 41.5"x105.4" 55.3"x140.5" 69.1"x175.6" 138.3"x351.2" 197.5"x501.7"

14.8cmx37.6cm 31.1cmx79.0cm 41.5cmx105.4cm 51.9cmx131.7cm 103.7cmx263.4cm 148.1cmx376.3cm

Distance

3.3ft(1.0m) 6.9ft(2.1m) 9.2ft(2.8m) 11.5ft(3.5m) 23ft(7.0m) 32.8ft(10.0m)

*This graph is for user reference only.

www.dell.com | support.dell.com

14 Using Your Projector

Adjusting the Projector Zoom and Focus

CAUTION: To avoid damaging the projector, ensure that the zoom lens and

elevator foot are fully retracted before moving the projector or placing the

projector in its carrying case.

1

Rotate the zoom tab to zoom in and out.

2

Rotate the focus ring until the image is clear. The projector focuses at distances

from 3.3ft to 32.8ft (1m to 10m).

3

Password Security

Protect your projector and restrict access to it with Password Security feature. This

security utility enables you to impose a variety of access restrictions to protect your

privacy and stop others from tampering with your projector. This means that the

projector cannot be used if it is taken without authorization, and thus serves as a

theft-prevention feature.

When Password Protect is enabled (On), a Password Protect screen requesting you

to enter a password will be displayed when the power plug is inserted into the

electrical outlet and the power for the projector is first turned on.

By default, this function is disabled. You can enable this feature using the Password

menu. Refer to section in this manual titled "Management Menu-Password" for

further details. This password security feature will be activated on the next time

you turn on the projector.

1 Zoom tab

2 Focus ring

2

1

Using Your Projector 15

If you enable this feature, you will be asked to enter the projector's password after

you turn on the projector:

1

1st time password input request:

a

Use the directional keys to enter the

password.

b

Press the Menu button to confirm.

c

If the password verification is successful, you

may resume with accessing the projector's

functions and its utilities.

2

If you have entered incorrect password, you will

be given another 2 chances. After the three

invalid attempts, the projector will

automatically turn off.

NOTE: If you forget your password, contact

Dell. For more information see, "Contacting

Dell".

www.dell.com | support.dell.com

16 Using Your Projector

Using the Control Panel

1 Power Turn the projector on and off. For more information,

see "Turning Your Projector On" on page 11 and

"Turning Your Projector Off" on page 11.

2 Source Press to toggle through Analog RGB, Composite,

Component-i, S-video, and Analog YPbPr sources when

multiple sources are connected to the projector.

3 Four Directional

Keys

The four directional keys can be used to

toggle through the tabs in the OSD.

4 TEMP warning light

• A solid orange TEMP light indicates that the projector

has overheated. The display automatically shuts

down. Turn the display on again after the projector

cools down. If the problem persists, contact Dell.

• A blinking orange Temp light indicates that a

projector fan has failed and the projector

automatically shuts down. If this problem persists,

contact Dell.

5 LAMP warning light

If the Lamp light is solid orange, replace the lamp.

6 Keystone adjustment If your image is not perpendicular to the screen, then it

does not appear square. Press to adjust image distortion

caused by tilting the projector. (±16 degrees)

7 Resync Press to synchronize the projector to the input source.

Resync does not operate if the on-screen display (OSD)

is displayed.

1

2

3

4

5

6

7

8

Using Your Projector 17

Using the Remote Control

8 Menu Press to activate the OSD. Use the directional keys and

the Menu button to navigate through the OSD.

1 Video Mode Press once to show the current display mode.

Press the button again to toggle between PC,

Movie, sRGB, or User mode.

2 Next Page Press to move to the next page.

NOTE: The USB cable must be connected to

use this function.

3 Menu Press to activate the on-screen display (OSD).

Use the directional keys and the Menu button to

navigate through the OSD.

4 4:3/16:9 Press to switch the aspect ratio: 1:1, 16:9, 4:3.

5 Hide button Press to hide the image, press again to display the

image.

6 Volume +/- Press to increase (+) or decrease (-) the volume

or toggle through the OSD tabs.

1

2

3

4

5

67

8

9

10

11

12

www.dell.com | support.dell.com

18 Using Your Projector

Using the On-Screen Display

The projector has a multi-language On-Screen Display (OSD) that can be

displayed with or without an input source present.

In the Main Menu, press the or button on the control panel or the  or 

button on the remote control navigate through the tabs. Press the button on

the control panel or the Menu button on the remote control to select a submenu.

In the submenus, press the or button on the control panel or the  or 

button on the remote control to make a selection. When an item is selected, the

color changes to dark gray. Use the or button on the control panel or the 

or  button on the remote control make adjustments to a setting.

To exit the OSD, go to the Exit tab and press the button on the control panel

or the Menu button on the remote control.

7 Keystone adjustment If your image is not perpendicular to the screen,

then it does not appear square. Press to adjust

image distortion caused by tilting the projector

(±16 degrees).

8 Resync Press to synchronize the projector to the input

source. Resync does not operate if the OSD is

displayed.

9 Source Press to toggle through Analog RGB, Composite,

Component-i, S-video, and Analog YPbPr sources

when multiple sources are connected to the

projector.

10 Directional keys Use the  or  button to select OSD items, use

the  or  button to make adjustments.

11 Previous Page Press to go to the previous page.

NOTE: The USB cable must be connected to

use this function.

12 Power Turn the projector on and off. For more

information, see "Turning Your Projector On" on

page 11 and "Turning Your Projector Off" on

page 11.

Using Your Projector 19

Main Menu

All Images Menu

BRIGHTNESS—Use the

or button on the

control panel or the

 or 

button on the remote

control to

adjust the brightness of the image.

C

ONTRAST—Use the

or button on the

control panel or the

 or 

button on the remote

control to adjust

the degree of difference

between the brightest and darkest parts of the

picture. Adjusting the contrast changes the

amount of black and white in the image.

C

OLOR TEMP—Adjust the color temperature. The

screen appears more blue at higher

temperatures. The screen appears more red at

lower temperatures.

User mode activates the values in the color

setting menu.

C

OLOR SETTING—Manually adjust red, green, and blue color.

K

EYSTONE—Adjust the image distortion caused by tilting the projector (

±16

degrees).

AUTO KEYSTONE—

Select

Yes

to enable the auto correction for vertical image distortion

caused by tilting the projector. To manually adjust the keystone, press the button

on the control panel or the Menu button on the remote control.

www.dell.com | support.dell.com

20 Using Your Projector

SEMI-AUTO KEYSTONE—

Press the

button on the control panel or the Menu button

on the remote control to activate the Semi-Auto Keystone correction for image

distortion.

ASPECT RATIO—Select an aspect ratio to adjust how the image appears.

• 1:1 — The input source displays without scaling.

Use 1:1 aspect ratio if you are using one of the following:

– VGA cable and the computer has a resolution less than XGA (1024 x 768)

– Component cable (576p/480i/480p)

–S-Video cable

– Composite cable

• 16:9 — The input source scales to fit the width of the screen.

• 4:3 — The input source scales to fit the screen.

Use 16:9 or 4:3 if you are using one of the following:

– Computer resolution greater than XGA

– Component cable (1080i or 720p)

VIDEO MODE—Select a mode to optimize the display image based on how the

projector is being used: Movie, PC, sRGB (provides more accurate color

representation), and User (set your preferred settings). If you adjust the settings

for White Intensity or Degamma, the projector automatically switches to User.

W

HITE INTENSITY—Select 0 to maximize the color reproduction and 10 to maximize

the brightness.

D

EGAMMA—Adjust between 1 and 6 to change the color performance of the display.

The default setting is 0.

Computer Image Menu

NOTE: This menu is only available when a computer is connected.

F

REQUENCY—Change the display data clock

frequency to match the frequency of your

computer graphics card. If you see a vertical

flickering bar, use Frequency control to minimize

the bars. This is a coarse adjustment.

T

RACKING—Synchronize the phase of the display

signal with the graphics card. If you experience

an unstable or flickering image, use Tracking to

correct it. This is a fine adjustment.

NOTE: Adjust Frequency first and then Tracking.

Strona się ładuje...

Dell 1200MP Instrukcja obsługi

Niniejsza instrukcja jest również odpowiednia dla

Dell 1200MP Instrukcja obsługi

w innych językach

Powiązane artykuły

Inne dokumenty