Description: Low RPM, low noise, ceiling mount bathroom fan
engineered for continuous operation Suitable for new construction,
or remodeling HVI certified ENERGY STAR qualified
ETL/cETL listed for use in insulated ceilings (Type I.C.).
Motor/Blower: Permanently lubricated high performance AC
motor engineered for continuous operation; power rating
120v/60Hz; motor equipped with thermal shut off.
Housing: Galvanized steel body; duct connector adapts to 4”, 5” or
6”, built-in back draft dampener; quick easy-mount anti-vibration
brackets included; designed for installation in ceilings with minimum
of 8” clearance.
Grille: Low maintenance, wipe clean; attaches to housing with
torsion springs.
Finishes: White (W); Satin Nickel (S); Oil Rubbed Bronze (OR).
Ventilating Area: For bathrooms up to 110 sq ft.
Installation: Must be installed by licensed professional. Complete
installation instructions included.
Warranty: 6 Years
Architect’s Specifications: Ventilation fan will be ceiling mount,
ENERGY STAR qualified, with no less than 110 CFM and no more
than 1.1 Sones as certified by HVI at 0.1 static pressure in inches
water gauge. Power consumption shall be no greater than 24.5 watts
and ENERGY STAR rated with an efficiency rating of no less than
4.56 CFM/watt. The motor will be permanently lubricated,
engineered for continuous operation. Duct diameter will be 4”, 5”,
or 6” round. Fan shall be listed for tub/shower enclosure when used
with GFCI branch circuit wiring and shall be ETL/cETL listed for
use in insulated ceiling (Type I.C.). Fan shall be ASHRAE 62.2,
LEED, California Title 24, and Washington VIAQ compliant.