Sony KV-14LT1K Instrukcja obsługi

R

4-206-416-41 (1)

FD Trinitron

Colour Television

KV-21LT1K

KV-14LT1K

Instruction Manual

GB

Návod k obsluze

Kezelési útmutató

Instrukcja obsługi

Инструкции за експлоатация

CZ

HU

PL

BG

Инструкция пo эксплyатации

Návod na obsluhu

RU

SK

00PortKV21LT1K.fm Page 1 Wednesday, May 16, 2001 12:34 PM

2

Safety Information

Do not open the cabinet and the rear

cover of the TV. Refer to qualiﬁed

service personnel only.

To prevent ﬁre or shock

hazard, do not expose the TV

to rain or moisture.

For your own safety, do not touch

any part of the TV, power lead or

aerial lead during lightning

storms.

Do not cover the

ventilation openings of the TV For

ventilation, leave a space of at

least 10cm all around the set.

Never place

the TV in hot, humid or

excessively dusty places. Do not

install the TV where it may be

exposed to mechanical vibrations.

To prevent ﬁre, keep inﬂammable

objects or naked lights (eg

candles) away from the TV.

Clean the TV with a soft, lightly

dampened cloth. Do not use

benzine, thinner or any other

chemicals to clean the TV. Do not

scratch the TV screen. As a safety

precaution, unplug the TV before

cleaning it.

Pull out the power lead by the

plug. Do not pull on the power

lead itself.

Take care not to place heavy

objects on the power lead as this

could result in damage.

We recommend you wind any

excess lead around the holders

provided on the rear of the TV.

Place the TV on a secure stable

stand. Do not allow children to

climb on to it. Do not place the TV

on its side or face up.

Do not cover the ventilation

openings of the TV with items

such as curtains or newspapers

etc.

Safety Information

Never push objects of any kind into

the set as this could result in a ﬁre

or electric shock. Never spill liquid

of any kind on the set. If any liquid

or solid object does fall through, do

not operate the TV. Have it checked

immediately by qualiﬁed

personnel.

For environmental and safety

reasons, it is recommended that

the TV set is not left in standby

mode when not in use. Disconnect

from the mains.

This set is to operate on a 220-

240V AC supply only. Take care

not to connect too many

appliances to the same power

socket as this could result in ﬁre

or electric shock.

Unplug the power lead before

moving the TV. Avoid uneven

surfaces, quick steps or excessive

force. If the set has been dropped

or damaged, have it checked

immediately by qualiﬁed service

personnel.

01P2GBKV21;14LT1K.fm Page 2 Wednesday, May 16, 2001 11:38 AM

3

GB

Introduction

Thank you for choosing this Sony FD Trinitron Colour Television.

Before operating the TV, please read this manual thoroughly and retain it for future

reference.

• Symbols used in the manual:

• Informs you of possible hazards.

• Important information

• Information on a feature.

•1,2... Sequence of instructions.

• Shaded buttons on the remote control show you the buttons you have to press to follow

the sequence of the instructions.

• Informs you of the result of instructions.

Table of Contents

Safety Information...................................................................................................................................2

Introduction..............................................................................................................................................3

Overview

Overview of Remote Control Buttons .................................................................................................. 4

Overview of TV Buttons ........................................................................................................................ 5

Installation

Inserting Batteries into the Remote Control ........................................................................................5

Connecting an Indoor Aerial (only for KV-14LT1K).......................................................................... 6

Connecting an Outdoor Aerial and VCR ............................................................................................ 6

First Time Operation

Switching On the TV and Automatically Tuning .............................................................................. 7

Menu system

Introducing and Using the Menu System............................................................................................ 9

Menu Guide ............................................................................................................................................. 9

Teletext...............................................................................................................................................15

Additional Information

Connecting Optional Equipment ........................................................................................................ 16

Using Optional Equipment .................................................................................................................. 16

Specifications.......................................................................................................................................... 17

Troubleshooting..................................................................................................................................... 18

MENU

K

Table of Contents

02GBKV-21LT1K.fm Page 3 Wednesday, May 16, 2001 11:39 AM

4

Overview of Remote Control Buttons

Overview

Muting the Sound

Press to mute TV sound. press again

to restore the sound.

Displaying on Screen

information

Press to display all on-screen

indications. Press again to cancel.

Selecting channels

Press to select channels.

For double-digit programme

numbers, e.g. 23, press -/-- first, then

the buttons 2 and 3.

If you enter an incorrect first digit,

this should be corrected by entering

another digit (0-9) and then selecting

-/-- button again to enter the

programme number of your choice.

Selecting TV mode

Press to switch off teletext or video

input.

Selecting Teletext

Press to switch on teletext.

This button only works in Teletext mode.

Function associated to this button

does not work with this TV.

Selecting Picture mode

Press repeatedly to change the

picture mode.

Adjusting TV volume

Press to adjust the volume of the TV.

This button only works in Teletext mode.

Function associated to this button

does not work with this TV.

Selecting channels

Press to select the next or previous

channel.

S

RM

887

PROGR

MENU

1

4

7

2

5

8

0

3

6

9

K

To Temporarily Switch Off TV

Press to temporarily switch off TV (the standby

indicator on TV lights up). Press again to switch on

TV from standby mode.

To save energy we recommend

switching off completely when TV is not

in use.

After 15 minutes without a

signal and without any button

being pressed, the TV switches

automatically into standby

mode.

Selecting input source

Press repeatedly until the desired

input symbol of the source appears

on the TV screen.

Back to the channel last

watched

Press to watch the last channel

selected (watched for at least 5

seconds).

Displaying the menu system

Press to display the menu on the TV

screen. Press again to remove the

menu display from the TV screen.

Menu selection

•When MENU is switched on:

Scroll Up

Scroll Down

Previous menu or selection

Next menu or selection

OK confirms your selection

•When MENU is switched off:

OK Shows a channel overview.

Press or to select the

channel and then, press again the

OK button to watch the selected

channel.

Selecting Screen format

Press to view programmes in 16:9

mode. Press again to return to 4:3

mode.

Besides TV functions, all coloured buttons as well as green symbols are also used for

Teletext operation. For more details, please refer to "“Teletext” section of this instruction

manual.

02GBKV-21LT1K.fm Page 4 Wednesday, May 16, 2001 11:39 AM

5

GB

Overview of TV Buttons

Inserting Batteries into the Remote Control

Make sure to insert the supplied batteries using the correct polarities.

Always remember you dispose of used batteries in an environmental friendly way.

On/Off

switch

Auto Start

Up Button

Volume

control

buttons

Video

Input jack

Press on the mark on

the front of the TV to

reveal the front

connectors.

Headphone

jack

Selecting

Input source

Audio

Input

jack

Standby

indicator

Programme Up or

Down Buttons (Select

TV channels)

Overview-Installation

02GBKV-21LT1K.fm Page 5 Wednesday, May 16, 2001 11:39 AM

6

GB

Connecting an Indoor Aerial

(only for KV-14LT1K)

Connecting an Outdoor Aerial and VCR

Installation

Connecting cables are not supplied

For more details of VCR connection, please refer to

the section “Connecting Optional

Equipment” of this instruction manual.

or

VCR

Scart lead is optional.

OUT IN

For a better reception we recommend you connect an external

aerial. However, where an external aerial is not available and

your local VHF/UHF signal is strong you can connect the

supplied indoor aerial as follows:

1 Insert the aerial into the opening on top of the set until it

clicks.

2 Connect the aerial connector to the aerial socket on the rear

of the set.

3 After turning on the TV, adjust the aerial for optimum

reception.

6

02GBKV-21LT1K.fm Page 6 Wednesday, May 16, 2001 11:39 AM

7

GB

Language

Select Language:

English

Español

Français

Italiano

Magyar

Nederlands

OK

Country

Select country:

-

Бългapия

Česká rep.

Magyarország

Polska

România

OK

Do you want to start

automatic tuning?

Yes

No

OK

K

Switching On the TV and Automatically Tuning

The first time you switch on your TV, a sequence of menu screen appear on the TV enabling

you to: 1) choose the language of the menu screen, 2) choose the country in which you wish

to operate the TV, 3) search and store all available channels (TV Broadcast) and 4) change

the order in which the channels (TV Broadcast) appear on the screen.

However, if you need to change the language menu, change or repeat the tuning (e.g. when

you move house) or rearrange again the order of the channels afterwards, you can do that

by selecting the appropriate menu in the (Set Up). For more information, refer to the

“Menu Guide” section of this instruction manual. You can also do that by pressing the

Auto Start Up Button on the TV set.

First Time Operation

continued...

1 Connect the TV plug to the mains socket (220-240V AC,

50Hz)

Press the on/off button on the TV set to turn on the TV.

The first time you press this button, a Language menu

displays automatically on the TV screen.

2 Press the or button on the remote control to select

the language, then press the OK button to confirm your

selection. From now on all the menus will appear in the

selected language.

3 The Country menu appears automatically on the TV

screen. Press the or button to select the country in

which you will operate the TV set, then press the OK

button to confirm your selection.

• If the country in which you want to use the TV set

does not appear in the list, select “-” instead of a

country.

• In order to avoid wrong teletext characters for

Cyrillic languages we recommend to select Russia

country in the case that your own country does not

appear in the list.

4 The Auto Tuning menu appears on the screen. Press the

OK button to select Yes.

02GBKV-21LT1K.fm Page 7 Wednesday, May 16, 2001 11:39 AM

8

First Time Operation

MENU

Your TV is now ready for use

5 A new menu appears on the screen asking you to check

that the aerial is connected. Ensure the aerial is connected

and then press the OK button to start the automatic

tuning.

The TV starts to automatically search and store all

available channels (TV Broadcast) for you.

This procedure could take some minutes. Please be

patient and do not press any button. Otherwise the

automatic tuning will not be completed.

6 After all available channels are captioned and stored,

the Programme Sorting menu appears automatically

on the screen enabling you to change the order in

which the channels appear on the screen.

a) If you do not wish to change the channel order, go to

step 7.

b) If you wish to change the channel order:

1 Press the or button to select the programme

number with the channel (TV Broadcast) you wish

to rearrange, then press the button.

2 Press the or button to select the new

programme number position for your selected

channel (TV Broadcast), then press .

3 Repeat steps b)1 and b)2 if you wish to change

the order of the other channels.

7 Press the MENU button to remove the menu from the

screen.

MENU

Please confirm that

aerial is connected

Confirm

OK

Programme: 01

System: B/G

Channel: C21

Auto Tuning

Searching...

Programme Sorting

Select channel:

Exit:

MENU

Programme:

01 TVE

02 TVE2

03 TV3

04 C33

05 C27

06 C58

OK

Programme Sorting

Select new position:

Exit: MENU

Programme:

01 TVE

02 TVE2

03 TV3

04 C33

05 C27

06 C58 05 C27

OK

K

02GBKV-21LT1K.fm Page 8 Wednesday, May 16, 2001 11:39 AM

9

GB

Introducing and Using the Menu System

Your TV uses an on-screen menu system to guide you through the operations. Use the

following buttons on the Remote Control to operate the menu system:

1 Press the MENU button to switch the first level menu on.

MENU

Menu System

2 • To highlight the desired menu or option, press or .

• To enter to the selected menu or option, press .

• To return to the last menu or option, press .

• To alter settings of your selected option, press //or.

• To confirm and store your selection, press OK.

3 Press the MENU button to remove the menu from the screen.

continued...

MENU

K

Menu Guide

PICTURE ADJUSTMENT

The “Picture Adjustment” menu allows you to

alter the picture adjustments.

To do that: after selecting the item you want to

alter press , then press repeatedly / /

or to adjust it and finally press OK to

store the new adjustment.

This menu also allows you to customise the

picture mode based on the programme you are

watching:

Personal (for individual settings).

Live (for live broadcast programmes).

Movie (for films).

Level 1 Level 2 Level 3 / Function

Picture Adjustment

Mode: Personal

Contrast

Brightness

Colour

Sharpness

Hue

Reset

OK

Picture Adjustment

Mode: Personal

Contrast

Brightness

Colour

Sharpness

Hue

Reset

OK

• Brightness, Colour and Sharpness can only be alterated if “Personal” mode is selected.

• Hue is only available for NTSC colour signal (e.g: USA video tapes).

• Select Reset and press OK to reset the picture to the factory preset levels.

02GBKV-21LT1K.fm Page 9 Wednesday, May 16, 2001 11:39 AM

10

Menu System

SLEEP TIMER

The “Sleep Timer” option in the “Timer” menu

allows you to select a time period for the TV to

switch itself automatically into the standby

mode.

To do that: after selecting the option press ,

then press or to set the time period delay

(max. of 4 hours) and finally press OK to store.

• While watching the TV, you can press the

button on the remote control to display the

time remaining.

• One minute before the TV switches itself into

standby mode, the time remaining is displayed on

the TV screen automatically.

ON TIMER

The “On Timer” option in the “Timer” menu

allows you to select a time period for the TV to

switch itself automatically on from standby

mode.

To do that: after selecting the option press ,

then press or to set the time period delay

(max. 12 hours) and press OK to store. Finally

press the standby button

on the remote

control. After the selected length of time the TV

switches on automatically.

• The standby indicator on the TV set flashes

regularly to indicate that “On Timer” is active.

• Any loss of power will cause these settings to be

cleared.

LANGUAGE / COUNTRY

The “Language/Country” option in the “Set

Up” menu allows you to select the language

that the menus are displayed in. It also allows

you to select the country in which you wish to

operate the TV set.

To do that: after selecting the option, press

and then proceed in the same way as in the

steps 2 and 3 of the section “Switching On the

TV and Automatically Tuning”.

Level 1 Level 2 Level 3 / Function

Picture Adjustment

Mode: Personal

Contrast

Brightness

Colour

Sharpness

Hue

Reset

OK

Timer

Sleep Timer: Off

On Timer: Off

OK

Timer

Sleep Timer: Off

On Timer: Off

OK

Picture Adjustment

Mode: Personal

Contrast

Brightness

Colour

Sharpness

Hue

Reset

OK

Timer

Sleep Timer: Off

On Timer: i Off

OK

Timer

Sleep Timer: Off

On Timer: Off

OK

continued...

Picture Adjustment

Mode: Personal

Contrast

Brightness

Colour

Sharpness

Hue

Reset

OK

Set Up

Language/Country

Auto Tuning

Programme Sorting

Manual Programme Preset

Advanced Features

OK

Set Up

Language/Country

Auto Tuning

Programme Sorting

Manual Programme Preset

Advanced Features

OK

02GBKV-21LT1K.fm Page 10 Wednesday, May 16, 2001 11:39 AM

11

GB

Menu System

continued...

AUTO TUNING

The “Auto Tuning” option in the “Set Up”

menu allows you to automatically search for

and store all available TV channels.

To do that: after selecting the option, press

and then proceed in the same way as in TV

steps 4 and 5 of the section “Switching On the

TV and Automatically Tuning”.

PROGRAMME SORTING

The “Programme Sorting” option in the “Set

Up” menu allows you to change the order in

which the channels (TV Broadcast) appear on

the screen.

To do that: after selecting the option, press

and then proceed in the same way as in step 6 b)

of the section “Switching On the TV and

Automatically Tuning”.

MANUAL PROGRAMME PRESET

The “Manual Programme Preset” option in the

“Set Up” menu allows you to:

a) Preset channels or a video input source one

by one to the programme order of your

choice. To do that:

1 After selecting the ”Manual Programme

Preset” option, press then with

Programme option highlighted press .

Press or to select on which

programme number you want to preset the

channel (for VCR, select programme number

“0”). Then press .

2 After selecting the System option, press .

Then press or to select the TV

Broadcast system (B/G for western European

countries or D/K for eastern European

countries). Then press .

Level 1 Level 2 Level 3 / Function

Picture Adjustment

Mode: Personal

Contrast

Brightness

Colour

Sharpness

Hue

Reset

OK

Set Up

Language/Country

Auto Tuning

Programme Sorting

Manual Programme Preset

Advanced Features

OK

Set Up

Language/Country

Auto Tuning

Programme Sorting

Manual Programme Preset

Advanced Features

OK

Picture Adjustment

Mode: Personal

Contrast

Brightness

Colour

Sharpness

Hue

Reset

OK

Set Up

Language/Country

Auto Tuning

Programme Sorting

Manual Programme Preset

Advanced Features

OK

Set Up

Language/Country

Auto Tuning

Programme Sorting

Manual Programme Preset

Advanced Features

OK

Picture Adjustment

Mode: Personal

Contrast

Brightness

Colour

Sharpness

Hue

Reset

OK

Set Up

Language/Country

Auto Tuning

Programme Sorting

Manual Programme Preset

Advanced Features

OK

Set Up

Language/Country

Auto Tuning

Programme Sorting

Manual Programme Preset

Advanced Features

OK

Manual Programme Preset

Programme:

System:

Channel:

Label:

AFT:

Skip:

Decoder:

Confirm

OK

01

B/G

C 21

--TVE

On

No

Off

02GBKV-21LT1K.fm Page 11 Wednesday, May 16, 2001 11:39 AM

12

Menu System

continued...

3 After selecting the Channel option, press .

Then press or to select the channel

tuning (“C” for terrestrial channels or “S” for

cable channels). Next press . After that,

press the number buttons to enter directly the

channel number of the TV Broadcast or the

channel of the VCR signal. If you do not

know the channel number, press or to

search for it. When you tune the desired

channel, press OK twice to store.

Repeat all the above steps to tune and store more

channels.

b)Normally the automatic fine tuning (AFT) is

operating, however you can manually fine

tune the TV to obtain a better picture

reception in the case that the picture is

distorted.

To do that: while watching the channel (TV

Broadcast) you wish to fine tune, select the

AFT option and press . Next press

or to adjust the fine tuning between -15

and +15. Finally press OK twice to store.

c) Skip any unwanted programme numbers

when they are selected with the PROGR +/-

buttons.

To do that: Highlighting the Programme

option, press the PROGR +/- button to select

the programme number you want to skip.

When the programme you want to skip

appears on the screen, select the Skip option

and press . Next press or to select

Yes. Finally press OK twice to confirm and

store.

To cancel this function afterwards, select “No”

instead of “Yes” in the step above.

d) Label a channel using up to five characters.

To do that: Highlighting the Programme

option, press the PROGR +/- button to select

the programme number with the channel

you wish to name. When the programme you

want to name appears on the screen, select

the Label option and press . Next

press o

r to select a letter, number or

“-“ for a blank. Press to confirm this

character. Select the other four characters in

the same way. After selecting all the

characters, press OK twice to store.

Level 1 Level 2 Level 3 / Function

Picture Adjustment

Mode: Personal

Contrast

Brightness

Colour

Sharpness

Hue

Reset

OK

Set Up

Language/Country

Auto Tuning

Programme Sorting

Manual Programme Preset

Advanced Features

OK

Set Up

Language/Country

Auto Tuning

Programme Sorting

Manual Programme Preset

Advanced Features

OK

Manual Programme Preset

Programme:

System:

Channel:

Label:

AFT:

Skip:

Decoder:

Confirm

OK

01

B/G

C 21

--TVE

On

No

Off

02GBKV-21LT1K.fm Page 12 Wednesday, May 16, 2001 11:39 AM

13

GB

Menu System

PARENTAL LOCK

The “Parental Lock” option in the “Advanced

Features” menu allows you to lock the buttons

of the TV set. In this way after this option is

selected and the TV set is switched off, the

buttons on the TV do not work and the TV only

works by using the remote control buttons.

To do that: after selecting the option, press .

Then press or to select On. Press OK to

confirm and store and finally press on the

remote control.

To cancel this function afterwards, select “Off”

instead of “On” in the step above.

NOISE REDUCTION

The “Noise Reduction” option in the

“Advanced Features” menu allows you to

reduce the picture noise in case of a weak

broadcasting signal.

To do that: after selecting the option, press .

Then press or to select On. Finally press

OK to confirm and store.

To cancel this function afterwards, select “Off”

instead of “On” in the step above.

AUTO VOLUME CONTROL

The “Auto Volume Ctrl.” option in the

“Advanced Features” menu allows you to keep

the same volume level of the channels,

independent of the broadcast signal (e.g. in case

of advertisement).

To do that: after selecting the option, press .

Then press o

r to select On. Finally press

OK to confirm and store.

To cancel this function afterwards, select “Off”

instead of “On” in the step above.

Level 1 Level 2 Level 3 / Function

Picture Adjustment

Mode: Personal

Contrast

Brightness

Colour

Sharpness

Hue

Reset

OK

Set Up

Language/Country

Auto Tuning

Programme Sorting

Manual Programme Preset

Advanced Features

OK

Advanced Features

Parental Lock:

Noise Reduction:

Auto Volume Ctrl.:

RGB Centring:

Picture Rotation:

Off

On

0

OK

Picture Adjustment

Mode: Personal

Contrast

Brightness

Colour

Sharpness

Hue

Reset

OK

Set Up

Language/Country

Auto Tuning

Programme Sorting

Manual Programme Preset

Advanced Features

OK

Advanced Features

Parental Lock:

Noise Reduction:

Auto Volume Ctrl.:

RGB Centring:

Picture Rotation:

Off

On

0

OK

Picture Adjustment

Mode: Personal

Contrast

Brightness

Colour

Sharpness

Hue

Reset

OK

Set Up

Language/Country

Auto Tuning

Programme Sorting

Manual Programme Preset

Advanced Features

OK

Advanced Features

Parental Lock:

Noise Reduction:

Auto Volume Ctrl.:

RGB Centring:

Picture Rotation:

Off

On

0

OK

continued...

02GBKV-21LT1K.fm Page 13 Wednesday, May 16, 2001 11:39 AM

14

Menu System

RGB CENTRING

When connecting an RGB source, such as a

“PlayStation”, you may need to readjust the

geometry of the picture. In that case, you can

readjust it through the “RGB Centring” option

in the “Advanced Features”.

To do that: while watching an RGB source select

the “RGB Centring” option and press . Then

press or to adjust the centre of the

picture between –10 and +10. Finally press OK

to confirm and store.

PICTURE ROTATION

(only for KV-21LT1K)

Because of the earth’s magnetism, the picture

might slant. In this case, you can correct the

pictures slant by using the option “Picture

Rotation” in the “Advanced Features” menu.

To do that: after selecting the option, press .

Then press or to correct any slant of the

picture between -5 and +5 and finally press OK

to store.

Level 1 Level 2 Level 3 / Function

Picture Adjustment

Mode: Personal

Contrast

Brightness

Colour

Sharpness

Hue

Reset

OK

Set Up

Language/Country

Auto Tuning

Programme Sorting

Manual Programme Preset

Advanced Features

OK

Advanced Features

Parental Lock:

Noise Reduction:

Auto Volume Ctrl.:

RGB Centring:

Picture Rotation:

Off

On

0

OK

Picture Adjustment

Mode: Personal

Contrast

Brightness

Colour

Sharpness

Hue

Reset

OK

Set Up

Language/Country

Auto Tuning

Programme Sorting

Manual Programme Preset

Advanced Features

OK

Advanced Features

Parental Lock:

Noise Reduction:

Auto Volume Ctrl.:

RGB Centring:

Picture Rotation:

Off

On

0

OK

02GBKV-21LT1K.fm Page 14 Wednesday, May 16, 2001 11:39 AM

15

GB

Teletext

Teletext is an information service transmitted by most TV stations. The index page of the

teletext service (usually page 100) gives you information on how to use the service. To

operate teletext, use the remote control buttons as indicated below.

Make sure to use a channel (TV Broadcast) with a strong signal, otherwise teletext errors

may occur.

To Switch On Teletext :

After select the channel (TV Broadcast) which carries the teletext you wish

to view, press .

To Select a Teletext page:

Input 3 digits for the page number, using the numbered buttons.

• If you have made a mistake, retype the correct page number.

• If the counter on the screen continues searching, it is because this page is not available. In that case,

input another page number

To access the next or preceding page:

Press PROGR + ( ) or PROGR - ().

To superimpose teletext on to the TV:

Whilst you are viewing teletext, press . Press it again to cancel teletext mode.

To freeze a teletext page:

Some teletext pages have sub-pages which follow on automatically. To stop them, press

/ . Press it again to cancel the freeze.

To reveal concealed information (e.g: answer to a quiz):

Press / . Press it again to conceal the information.

To Switch Off Teletext:

Press .

Fastext

Fastext service lets you access pages with one button push.

While you are in Teletext mode and Fastext is broadcast, a colour coded menu appears at

the bottom of the teletext page. Press the colour button (red, green, yellow or blue) to access

the corresponding page.

Teletext

TELETEXT

Index

Programme

News

Sport

Weather

25

153

101

98

TELETEXT

Index

Programme

News

Sport

Weather

25

153

101

98

TELETEXT

Index

Programme

News

Sport

Weather

25

153

101

98

TELETEXT

Index

Programme

News

Sport

Weather

25

153

101

98

TELETEXT

Index

Programme

News

Sport

Weather

25

153

101

98

TELETEXT

Index

Programme

News

Sport

Weather

25

153

101

98

TELETEXT

Index

Programme

News

Sport

Weather

25

153

101

98

TELETEXT

Index

Programme

News

Sport

Weather

25

153

101

98

02GBKV-21LT1K.fm Page 15 Wednesday, May 16, 2001 11:39 AM

16

Connecting Optional Equipment

Using the following instructions, you can connect a wide range of optional equipment to

your TV set. (Connecting cables are not supplied).

Connecting a VCR:

To connect a VCR, please refer to

the section “Connecting the

aerial and VCR” of this instruction

manual. We recommend you

connect your VCR using a scart

lead. If you do not have a scart

lead, tune in the VCR test signal

to TV programme number “0”.

by using “Manual Programme

Preset” option. (for details how

to manual programme, see page

11, step a).

Also refer to your VCR

instruction manual to find out

how to find the output channel

of your VCR.

If you have connected a decoder

to a VCR which supports

Smartlink feature:

Select the “Manual Programme Preset” option in the “Set Up” menu and after entering in the

“Decoder*” option, select “On” (by using or ) to each scrambled channel.

*This option is only available depending the country you have selected in the “Country” menu.

** “PlayStation” is a product of Sony Computer Entertainment, Inc.

** “PlayStation” is a trademark of Sony Computer Entertainment, Inc.

Using Optional Equipment

1 Connect your equipment to the designated TV socket, as indicated above.

2 To watch the picture of the connected equipment, press the button repeatedly until the

correct input symbol appears on the screen.

Symbol Input Signals

1 • Audio / video input signal through the Scart connector C

• RGB input signal through the Scart connector C. This symbol appears only

if a RGB source has been connected.

2 • Video input signal through the phono socket A and Audio input signal

through B.

3 Switch on the connected equipment.

4 Press button on the remote control to return to the normal TV picture.

AB

1

2

C

8mm/Hi8/DVC

camcorder

Additional Information

“PlayStation”**

VCR

Decoder

02GBKV-21LT1K.fm Page 16 Wednesday, May 16, 2001 11:39 AM

17

GB

Specifications

Additional Information

TV system:

B/G/H, D/K

Colour system:

PAL, SECAM

NTSC 3.58, 4.43 (only Video In)

Channel Coverage:

VHF: E2-E12

UHF: E21-E69

CATV: S1-S20

HYPER: S21-S41

D/K: R1-R12, R21-R69

Picture Tube:

Flat Display FD Trinitron

Rear Terminals

:1/ 21-pin scart connector

(CENELEC standard)

including audio/video

input, RGB input, TV audio/

video output.

Front Terminals

…2 video input – phono jack

2 audio input – phono jack

headphones jack

Design and specifications are subject to change without notice.

Ecological Paper- Totally Chlorine Free

Sound Output:

• KV-21LT1K:

1 x 8 W (music power)

1 x 4 W (RMS Mono)

• KV-14LT1K:

1 x 6 W (music power)

1 x 3 W (RMS Mono)

Power Consumption:

• KV-21LT1K: 55 W

• KV-14LT1K: 42 W

Standby Power Consumption:

≤ 0.55 W

Dimensions (w x h x d) :

• KV-21LT1K: Approx. 514 x 478 x 487 mm.

• KV-14LT1K: Approx. 393 x 358 x 415 mm.

Weight:

• KV-21LT1K: Approx. 24 Kg.

• KV-14LT1K: Approx. 11.5 Kg.

Accessories supplied:

1 Remote Control (RM-887)

2 Batteries (IEC designated)

1 Aerial (only for KV-14LT1K)

Other features:

• Teletext, Fastext, TOPtext

• Sleep Timer

• Wake UP Timer

• Smartlink (direct link between your TV set

and a compatible VCR. For more

information on Smartlink, please refer to

the Instruction Manual of your VCR).

• TV system Autodetection.

02GBKV-21LT1K.fm Page 17 Wednesday, May 16, 2001 11:39 AM

18

Troubleshooting

Here are some simple solutions to the problems which may affect the picture and sound.

Additional Information

Problem

No picture (screen is dark) and no

sound.

Poor or no picture (screen is dark),

but good sound.

No picture or no menu information

from the equipment connected to the

Scart connector.

Good picture, no sound.

No colour on colour programmes.

Distorted picture when changing

programmes or selecting teletext.

Wrong characters appear when

viewing teletext.

Picture slanted (only for

KV-21LT1K)

Noisy picture when viewing a TV

channel.

Remote control does not function.

The standby indicator on the TV

flashes even though the “On Timer”

function is not in use.

Solution

•Check the aerial connection.

• Plug the TV in and press the button on the front of

TV.

•If the standby indicator is on, press button on

the remote control.

•Using the menu system, select the “Picture

Adjustment” menu and select “Reset” to return to the

factory settings.

•Check that the optional equipment is on and press the

button repeatedly on the remote control until the

correct input symbol is displayed on the screen.

• Press the +/- button on the remote control.

• Using the menu system, select the “Picture

Adjustment” menu and select “Reset” to return to

factory settings.

• Turn off any equipment connected to the Scart

connector on the rear of the TV.

• Using the menu system, enter to the “Language/

Country” menu and select the country in which you

operate the TV set. For Cyrillic languages, we

recommend to select Russia country in the case that

your own country does not appear in the list.

• Using the menu system, select the “Picture Rotation”

option in the “Advanced Features” menu to correct the

picture slant.

• Using the menu system, select the “Manual

Programme Preset” menu and adjust Fine Tuning

(AFT) to obtain better picture reception.

• Using the menu system, select the “Noise Reduction”

option in the “Advanced Features” menu and select

“On” to reduce the noise in the picture.

• Replace the batteries.

• Contact to your nearest Sony service centre.

In case of problems, have your TV serviced by qualified personnel. Never open the

casing yourself.

02GBKV-21LT1K.fm Page 18 Wednesday, May 16, 2001 11:39 AM

CZ

03P2CZKV21;14LT1K.fm Page 1 Wednesday, May 16, 2001 11:42 AM

2

Bezpečnostní opatření

Tento televizor pracuje pouze s

napětím 220-240 V. V případě

zapojení příli mnoha spotřebičů

do jedné el. zásuvky může dolít k

úrazu el. proudem či požáru.

Bezpečnostní opatření

Z bezpečnostních důvodů a z

důvodů ochrany životního

prostředí doporučujeme

neponechávat televizor v

pohotovostním stavu pokud není

del í dobu používán. V tomto

případě odpojte televizor

z el. sítě.

Nevkládejte žádné předměty do

televizoru, rovněž do televizoru

nelijte jakoukoliv tekutinu. V

případě, že se tak stane ať již

úmyslně či neúmyslně televizor

nezapínejte a sdělte tuto skute

čnost nejbližšímu

autorizovanému servisu SONY,

který odborně televizor prověří.

Neotevírejte zadní kryt televizoru.

Toto přenechte pouze

kvalifikovaným odborníkům z

autorizovaných servisů SONY.

Nedotýkejte se během bouřky

jakékoliv časti el. přívodního

kabelu ani anténního kabelu.

Nevystavujte televizor dešti a

vlhku, předejdete tak případnému

úrazu el. proudem.

Nezakrývejte ventilační otvory

televizoru. Nechte kolem

televizoru alespoň 10 cm

prostoru pro ventilaci vzduchu.

Neumisť ujte televizor na horká,

mokrá či extrémněprašná místa.

Přístroj nesmí být vystaven

mechanickým vibracím.

Hořlavé látky, či otevřený oheň

(svíčka) neumisť ujte v těsné

blizkosti televizoru.

Televizor můžete čistit pouze jemnou,

lehce navlhčenou látkou.

Nepoužívejte benzín, ředidlo ani jiné

chemikálie, rovněž nepoužvejte čistící

prostředky s brusnými účinky.

Nepoškrábejte povrch obrazovky. Pro

vaši bezpečnost doporučujeme

televizor před čištěním vždy odpojit

od el. sítě.

Při vytahování el. přívodního

kabelu tahejte pouze za zástrčku,

netahejte za kabel.

Abyste nepo

š

kodili el. přívodní

kabel nepokládejte na něj žádné

těžké předměty . Doporučujeme

přebytečnou část el. přívodního

kabelu navinout kolem háčků na

zadní straně televizoru.

Televizor postavte vždy na

stabilní a bezpečný stolek.

Nedovolte dětem aby na televizor

lezli, sedali si na něj, či si na něm

hráli.

Při manipulaci napokládejte

televizor na boční ani na čelní

stranu.

Před manipulací vypojte televizor

z el. sítě. Při manipulaci

postupujte opatrně abyste

televizor nepoškodili. Pokud vám

televizor upadl, či byl jiným

způsobem poškozen nechte ho

prověřit odborným pracovníkem

autorizovaného servisu SONY.

Nezakrývejte ventilační otvory

televizoru novinami, časopisy

ani záclonami a závěsy.

03P2CZKV21;14LT1K.fm Page 2 Wednesday, May 16, 2001 11:42 AM

Strona jest ładowana ...

Sony KV-14LT1K Instrukcja obsługi

Ten podręcznik jest również odpowiedni dla

Sony KV-14LT1K Instrukcja obsługi

w innych językach

Powiązane dokumenty