Yamaha DSP -A780 Instrukcja obsługi

Marka: Yamaha

Model: DSP -A780

Kategoria: Sprzęt muzyczny

Typ: Instrukcja obsługi

Niniejsza instrukcja jest również odpowiednia dla

DSP-A780

NATURAL SOUND DIGITAL SOUND FIELD PROCESSING AMPLIFIER DSP-A780

DSP

PRO LOGIC

CONTENTS

PRECAUTIONS & SAFETY INSTRUCTIONS ....................Inside Front Cover

SETUP & ADJUSTMENT..................................................................................3

1-1. GETTING STARTED.................................................................................3

1-2. SETUP.......................................................................................................8

1-3. CONTROLS & ADJUSTMENTS.............................................................16

1-4. ADJUSTMENT.........................................................................................20

GENERAL OPERATION.................................................................................24

2-1. PLAYING A SOURCE.............................................................................24

2-2. RECORDING A SOURCE TO AUDIO/VIDEO TAPE

(OR DUBBING FROM A TAPE TO ANOTHER)....................................25

2-3. DIGITAL SOUND FIELD PROGRAMS ..................................................28

2-4. SELECTING SOUND FIELD PROGRAMS............................................28

2-5. MUTING THE EFFECT SOUND ............................................................28

2-6. SUPERIMPOSED VIDEO PROGRAM/PARAMETER

DISPLAY..................................................................................................28

2-7. DESCRIPTIONS OF THE SOUND FIELD PROGRAMS......................29

CREATING YOUR OWN SOUND FIELDS....................................................33

3-1. SELECTING AND EDITING PROGRAM PARAMETERS ....................33

3-2. DESCRIPTIONS OF THE DIGITAL SOUND FIELD

PARAMETERS........................................................................................35

TROUBLESHOOTING ....................................................................................37

SPECIFICATIONS...........................................................................................38

OPERATION MANUAL

DIGITAL SOUND FIELD PROCESSING AMPLIFIER

1 Read Instructions – All the safety

and operating instructions should be read

before the unit is operated.

2 Retain Instructions – The safety and

operating instructions should be retained

for future reference.

3 Heed Warnings – All warnings on the

unit and in the operating instructions

should be adhered to.

4 Follow Instructions – All operating

and other instructions should be followed.

5 Water and Moisture – The unit

should not be used near water – for

example, near a bathtub, washbowl,

kitchen sink, laundry tub, in a wet

basement, or near a swimming pool, etc.

6 Carts and Stands – The unit should

be used only with a cart or stand that is

recommended by the manufacturer.

6A A unit and cart combination should

be moved with care. Quick

stops, excessive force, and

uneven surfaces may

cause the unit and cart

combination to overturn.

7 Wall or Ceiling Mounting – The unit

should be mounted to a wall or ceiling

only as recommended by the

manufacturer.

8 Ventilation – The unit should be

situated so that its location or position

does not interfere with its proper

ventilation. For example, the unit should

not be situated on a bed, sofa, rug, or

similar surface, that may block the

ventilation openings; or placed in a built-

in installation, such as a bookcase or

cabinet that may impede the flow of air

through the ventilation openings.

9 Heat – The unit should be situated

away from heat sources such as

radiators, stoves, or other appliances that

produce heat.

10 Power Sources – The unit should be

connected to a power supply only of the

type described in the operating

instructions or as marked on the unit.

11 Power-Cord Protection – Power-

supply cords should be routed so that

they are not likely to be walked on or

pinched by items placed upon or against

them, paying particular attention to cords

at plugs, convenience receptacles, and

the point where they exit from the unit.

12 Cleaning – The unit should be

cleaned only as recommended by the

manufacturer.

13 Nonuse Periods – The power cord of

the unit should be unplugged from the

outlet when left unused for a long period

of time.

14 Object and Liquid Entry – Care

should be taken so that objects do not fall

into and liquids are not spilled into the

inside of the unit.

15 Damage Requiring Service – The

unit should be serviced by qualified

service personnel when:

A. The power-supply cord or the plug

has been damaged;

B. Objects have fallen, or liquid has

been spilled into the unit;

C. The unit has been exposed to rain;

D. The unit does not appear to operate

normally or exhibits a marked change in

performance;

E. The unit has been dropped, or the

cabinet damaged.

16 Servicing – The user should not

attempt to service the unit beyond those

means described in the operating

instructions. All other servicing should be

referred to qualified service personnel.

17 Power Lines – An outdoor antenna

should be located away from power lines.

18 Grounding or Polarization –

Precautions should be taken so that the

grounding or polarization is not defeated.

SAFETY INSTRUCTIONS

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK), NO USER-SERVICEABLE

PARTS INSIDE, REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead

symbol, within an equilateral triangle,

is intended to alert you to the

presence of uninsulated “dangerous

voltage” within the product’s

enclosure that may be of sufficient

magnitude to constitute a risk of

electric shock to persons.

The exclamation point within an

equilateral triangle is intended to alert

you to the presence of important

operating and maintenance

(servicing) instructions in the

literature accompanying the

appliance.

•

Explanation of Graphical Symbols

CAUTION

IMPORTANT!

Please record the serial number of this

unit in the space below.

Model:

Serial No.:

The serial number is located on the rear

of the unit.

Retain this Owner’s Manual in a safe

place for future reference.

WARNING

TO REDUCE THE RISK OF FIRE OR

ELECTRIC SHOCK, DO NOT EXPOSE

THIS UNIT TO RAIN OR MOISTURE.

PRECAUTIONS & SAFETY INSTRUCTIONS

1 To ensure the finest performance,

please read this manual carefully. Keep it in

a safe place for future reference.

2 Install your unit in a cool, dry, clean

place – away from windows, heat sources,

and too much vibration, dust, moisture or

cold. Avoid sources of hum (transformers,

motors). To prevent fire or electrical shock,

do not expose to rain and water.

3 Do not operate the unit upside-down. It

may overheat, possibly causing damage.

4 Never open the cabinet. If a foreign

object drops into the set, contact your

dealer.

5 Do not use force on switches, knobs or

cords. When moving the set, first turn the

unit off. Then gently disconnect the power

plug and the cords connecting to other

equipment. Never pull the cord itself.

6 Do not attempt to clean the unit with

chemical solvents; this might damage the

finish. Use a clean, dry cloth.

7 Always set the volume control to “–

∞

”

while lowering the tonearm to play a record;

turn the volume up with the stylus in the

groove.

8 Be sure to read the “Troubleshooting”

section on common operating errors before

concluding that your unit is faulty.

9 Do not connect audio equipment to the

AC outlets on the rear panel if that

equipment requires more power than the

outlets are rated to provide.

We Want You Listening

For A Lifetime

YAMAHA and the Electronic Industries

Association’s Consumer Electronics

Group want you to get the most out of

your equipment by playing it at a safe

level. One that lets the sound come

through loud and clear without annoying

blaring or distortion – and, most

importantly, without affecting your

sensitive hearing. Since hearing damage

from loud sounds is often undetectable

until it is too late, YAMAHA and the

Electronic Industries

Association’s Consumer

Electronics Group

recommend you to avoid

prolonged exposure from

excessive volume levels.

PRECAUTIONS

FCC INFORMATION

1. IMPORTANT NOTICE : DO NOT MODIFY THIS UNIT!

This product, when installed as indicated in the instructions contained in this

manual, meets FCC requirements. Modifications not expressly approved by

Yamaha may void your authority, granted by the FCC, to use the product.

2. IMPORTANT : When connecting this product to accessories and/or another

product use only high quality shielded cables. Cable/s supplied with this product

MUST be used. Follow all installation instructions. Failure to follow instructions

could void your FCC authorization to use this product in the USA.

3. NOTE : This product has been tested and found to comply with the requirements

listed in FCC Regulations, Part 15 for Class “B” digital devices. Compliance with

these requirements provides a reasonable level of assurance that your use of

this product in a residential environment will not result in harmful interference

with other electronic devices.

This equipment generates/uses radio frequencies and, if not installed and used

according to the instructions found in the users manual, may cause interference

harmful to the operation of other electronic devices.

Compliance with FCC regulations does not guarantee that interference will not

occur in all installations. If this product is found to be the source of interference,

which can be determined by turning the unit “OFF” and “ON”, please try to

eliminate the problem by using one of the following measures:

Relocate either this product or the device that is being affected by the

interference.

Utilize power outlets that are on different branch (circuit breaker or fuse) circuits

or install AC line filter/s.

In the case of radio or TV interference, relocate/reorient the antenna. If the

antenna lead-in is 300 ohm ribbon lead, change the lead-in to coaxial type

cable.

If these corrective measures do not produce satisfactory results, please contact

the local retailer authorized to distribute this type of product. If you can not

locate the appropriate retailer, please contact Yamaha Electronics Corp., U.S.A.

6660 Orangethorpe Ave, Buena Park, CA 90620.

The above statements apply ONLY to those products distributed by Yamaha

Corporation of America or its subsidiaries.

Congratulations!

You are the proud owner of a Yamaha Digital Sound Field Processing (DSP) System—an

extremely sophisticated audio component. The DSP system takes full advantage of Yamaha’s

undisputed leadership in the field of digital audio processing to bring you a whole new world

of listening experiences. Follow the instructions in this manual carefully when setting up your

system, and the DSP system will sonically transform your room into a wide range of listening

environments—anything from a famous concert hall to a cozy jazz club. In addition, you get

incredible realism from Dolby-Surround encoded video sources using the built-in Dolby Pro

Logic Surround Decoder.

Rather than tell you about the wonders of digital sound field processing, however, let’s get

right down to the business of setting up the system and trying out its many capabilities.

Please read this operation manual carefully and store it in a safe place for later reference.

1-1. GETTING STARTED

Unpacking

If you haven’t already done so, carefully remove this unit and its

accessories from the box and wrapping material. You should find the

unit itself and the following accessories.

Installing the Remote Control Unit Batteries

Since the remote control unit will be used for many of this unit’s

control operations, you should begin by installing the supplied

batteries.

1. Turn the remote control unit over, and remove the battery

compartment cover by pulling it in the direction of the white arrow on

the figure shown below.

2. Insert the batteries (R6, AA, UM-3 type), being careful to align

them with the polarity markings on the inside of the battery

compartment.

3. Close the battery compartment cover.

SETUP & ADJUSTMENT

Remote control

Batteries

●

When you notice that remote control operation has become

erratic, or the distance from which the remote control will function

has decreased, it’s time to replace the batteries. Always replace

all batteries at the same time.

●

This remote control uses an advanced, highly directional infrared

beam. Be sure to aim the remote control directly at the remote

control sensor on the main unit when operating.

Remote control transmitter operation range

Notes

●

There should be no large obstacles between the remote

control transmitter and the main unit.

●

If the remote control sensor is directly illuminated by strong

lighting (especially an inverter type of fluorescent lamp etc.),

it might cause the remote control transmitter to work

incorrectly. In this case, reposition the main unit to avoid

direct lighting.

Digital Sound Field Processing

What is it that makes live music so good? Today’s advanced

sound reproduction technology lets you get extremely close to the

sound of a live performance, but chances are you’ll still notice

something missing, the acoustic environment of the live concert hall.

Extensive research into the exact nature of the sonic reflections that

create the ambience of a large hall has made it possible for Yamaha

engineers to bring you this same sound in your own listening room,

so you’ll feel all the sound of a live concert. What’s more, our

technicians, armed with sophisticated measuring equipment, have

even made it possible to capture the acoustics of a variety of actual

concert halls, jazz clubs, theaters, etc. from around the world, to

allow you to accurately recreate any one of these live performance

environments, all in your own home.

Dolby Pro Logic Surround

The Dolby Pro Logic Surround Decoder program lets you

experience the dramatic realism and impact of Dolby Surround movie

theater sound in your own home. Dolby Pro Logic gets its name from

its professional-grade steering logic circuitry, which provides greater

effective channel separation for a much higher degree of realism than

the “passive” Dolby Surround circuits found in today’s typical home

audio/video equipment. Dolby Pro Logic Surround provides a true

center channel, so that there are four independent channels, unlike

passive Dolby Surround, which has in effect only three channels: left,

right, and rear. This center channel allows listeners seated in even

less-than-ideal positions to hear the dialog originating from the action

on the screen while experiencing good stereo imaging.

30°

Remote control

sensor

Within approximately

7 m (23 feet)

This Dolby Pro Logic Surround Decoder employs a digital signal

processing system. This system improves the stability of sound at

each channel and crosstalk between channels, so that positioning of

sounds around the room is more accurate compared with

conventional analog signal processing systems.

In addition, this unit features a built-in automatic input balance

control. This always assures you the best performance without

manual adjustment.

Manufactured under license from Dolby Laboratories Licensing

Corporation. Additionally licensed under Canadian patent number

1,037,877. “Dolby”, “Pro Logic”, and the double-D symbol are

trademarks of Dolby Laboratories Licensing Corporation.

Dolby Pro Logic Surround + DSP

Additionally you can enjoy sound environment created by the

combination of Dolby Pro Logic and YAMAHA DSP.

Precise sound

movement and orientation by the Dolby Pro Logic technology is

added to sound fields which are precisely recreated on the

basis of actual acoustic environments by the DSP technology,

so it is suitable for any Audio/Video source with video image.

This combination is used on sound field programs No. 5

through No. 14, and No. 16.

The YAMAHA “CINEMA DSP” logo indicates these programs

created by the combination of Dolby Pro Logic and YAMAHA DSP

technology.

VIDEO SUPERIMPOSE

If you connect your video cassette recorder, video disc player,

video monitor, etc. to this unit, you can take advantage of this unit’s

capability to display program titles, parameter data and information

about other various settings and adjustments on your video monitor’s

screen. This information will be superimposed over the video image.

If there is no video source connected or it is turned off, the

information will be displayed over a blue colored background.

NOTE: The program titles, parameter data and other information are

also displayed on the display panel of this unit.

P01 CONCERT HALL

CONCERT HALL

DSP

Setting Up Your Speaker System

This unit has been designed to provide the best sound field

quality with a full five-speaker system setup, using one extra pairs of

effect speakers to generate the sound field plus one center speaker

for dialog, when using Dolby Pro Logic Surround decoding. We

therefore recommend that you use a five-speaker setup. A four-

speaker system using only one pair of effect speakers for the sound

field will still provide impressive ambience and effects, however, and

may be a good way to begin with this unit. You can always upgrade

to the full five speaker system later.

Use of the Center Dialog Speaker Is Recommended

With digital sound field programs No. 5 through No. 16, by using

either the Directional Enhancement circuit or the Dolby Pro Logic

decoder, decoded signals will be output from the center channel.

Therefore, if you want to upgrade the Audio/Video home theater

system, it is recommended to use the center speaker unit.

If for some reason it is not practical to use a center speaker, it is

possible to enjoy movie viewing without it. Best results, however, are

obtained with the full system.

It is also possible to further expand your system with the addition

of a subwoofer and amplifier. You may wish to choose the

convenience of a Yamaha Active Servo Processing Subwoofer

System, which has its own built-in power amp.

5 Speaker System

This is the recommended speaker

system, providing the best sound

effects.

With sound field programs No. 1

through No. 4, using effect speakers

reproduces the effective sound field.

With the sound field programs No. 5

through No. 16, the center speaker

provides precise center localization.

Center Mode—Set to NRML or WD.

(See page 22.)

4 Speaker System

Simple system without center

speaker.

With sound field programs No. 1

through No. 4, a sound effect matching

that of a 5-speaker system can be

obtained. With sound field programs No.

5 through No. 16, center sound is output

from the left and right main speakers.

Center Mode—Set to PHNTM.

(See page 22.)

Speakers and Speaker Placement

Your full five-speaker system will require two speaker pairs: the

MAIN SPEAKERS (your normal stereo speakers) and the REAR

EFFECT SPEAKERS, plus the CENTER SPEAKER. You may also

be using a subwoofer.

You will probably use your present stereo speakers as the MAIN

SPEAKER pair. The rear effect do not need to be equal with the

MAIN SPEAKERS, although the center speaker should be as close

as possible. They should have enough power handling capacity to

accept the maximum output of the DSP system.

Place the MAIN SPEAKERS in the normal position.

Place the REAR EFFECT SPEAKERS behind your listening

position. They should be nearly six feet up from the floor.

Place the CENTER SPEAKER precisely between the two MAIN

SPEAKERS. (To avoid interference, keep the speaker above or

below the television monitor, or use a magnetically shielded speaker.)

If using a SUBWOOFER, such as a Yamaha Active Servo

Subwoofer System, the position of the speaker is not so critical

because low bass tones are not highly directional.

NOTE: The Yamaha NS-C110 speaker, available in some countries,

is an ideal choice for the center speaker.

Main speaker Rear effect speaker Center speaker

1-2. SETUP

Before you start making connections make sure all related electronic components are turned OFF.

REAR PANEL

SINGLE

DUAL

SINGLE

10dB 0dB

To AC outlet

12 3

456

890A

(General Model)

1 Audio Signal Connection Jacks (for Audio Source Equipment)

Connect the inputs and/or outputs of your audio equipment.

2 Audio/Video Signal Connection Jacks (for Video Source

Equipment)

Connect the audio and video inputs and/or outputs of your video

equipment. In place of the VIDEO jacks, the S VIDEO jacks can

be used for higher resolution and improved picture quality if your

VCR, monitor, etc. are equipped with S-VIDEO connectors.

3 Main Speaker Terminals

Connect the main speakers here.

4 Video NTSC/PAL Switch (General Model only)

Set this switch to the position corresponding to the standard

that your video equipment employs.

5 Low Pass Jack

When using a subwoofer, connect its amplifier input to this jack.

Frequencies below 200 Hz from the left main, right main and

center channels are output to this jack.

6 Main Level Switch

Normally set to “0 dB”. If desired, you can decrease the main-

channel output level at the MAIN speaker terminals by 10 dB by

setting this switch to “–10 dB”.

7 Center Speaker Terminals

Connect one or two center speakers here.

8 Rear Effect Speaker Terminals

Connect the rear effect speakers here.

9 Voltage Selector (General Model only)

Be sure to set to the line voltage in your area before applying

power. Consult your dealer if unsure of the correct setting.

0 Switched AC Outlets

You may plug other audio components into these sockets as long

as their combined power consumption does not exceed the

specified value shown. “Switched” means that these components

are turned on and off by this unit’s power switch.

A Unswitched AC Outlet (U.S.A., Canada and General Models)

The total power consumption of audio components plugged into

this socket should not exceed the specified value shown.

“Unswitched” means that power is available even when this unit is

off.

GENERAL INSTRUCTIONS FOR CONNECTIONS

Make sure that you have the left (L) and right (R) channels

correctly connected. That means that jacks marked “L” on this unit

must be connected to jacks marked “L” on other units. Likewise with

the “R” jacks. This is easy if you remember to always use the red

plug for the “R” jacks and the other plugs for the “L” jacks.

With speaker connections you must also be sure that the polarity

is correct. For each amplifier and each channel, connect the plus (+)

terminal of the amplifier to the plus terminal of the speaker, and

connect the minus (–) terminal of the amplifier to the minus terminal

of the speaker. To keep track of polarity, use a speaker cable that has

one of the two wires marked by a stripe or a different color.

AUDIO OUT

LINE OUT

LINE IN

CD player

Tape deck

Video disc player

Tuner

Video cassette recorder 2

VIDEO OUT

AUDIO IN

VIDEO IN

AUDIO OUT

VIDEO OUT

OUTPUT

Monitor TV

TV/Satellite tuner

AUDIO OUT

VIDEO OUT

Video cassette recorder 1

AUDIO IN

VIDEO IN

AUDIO OUT

VIDEO OUT

VIDEO IN

CONNECTING AUDIO/VIDEO SOURCE EQUIPMENT TO THIS UNIT

CONNECTING TO S VIDEO JACKS

If your video cassette recorder, video disc player, etc. and your

monitor are equipped with “S” (high-resolution) video terminals,

connect them to this unit’s S VIDEO jacks, and connect this unit’s

S VIDEO MONITOR OUT jack to the “S” video input of your monitor.

Otherwise, connect the composite video jacks from your video

cassette recorder, video disc player, etc. to the VIDEO jacks of this

unit, and connect this unit’s VIDEO MONITOR OUT jack to the

composite video input of your monitor.

NOTE: If video signals are sent to both S VIDEO input and VIDEO

input jacks, the signals will be sent to their respective output jacks

independently.

NOTE: If your unit is the General Model, be sure the NTSC/PAL

switch has been correctly set to the standard that your video

equipment employs. U.S.A. and Canada models have no switch and

use the NTSC standard, while other models without a switch use the

PAL standard.

Notes about the Video superimpose

●

If you watch a video source that is connected to both S VIDEO and

VIDEO input jacks of this unit, signals of screen display information

are output from only the S VIDEO MONITOR OUT jack.

●

When no video signal is input to either S VIDEO or VIDEO input

jacks of this unit, signals of screen display information are output

from both S VIDEO MONITOR OUT and VIDEO MONITOR OUT

jacks with a color background.

* For the General Model, if the NTSC/PAL switch on the rear panel

is set to “PAL”, nothing will be output from either S VIDEO

MONITOR OUT or VIDEO MONITOR OUT jack in this case.

S-VIDEO

OUT

VIDEO OUT

Video cassette recorder 1

Video cassette recorder 2

VIDEO

OUT

S-VIDEO OUT

VIDEO IN

S-VIDEO IN

VIDEO IN

S-VIDEO IN

VIDEO OUT

S-VIDEO OUT

Video disc player

Monitor TV

CONNECTING SPEAKER SYSTEMS

Connect the SPEAKERS terminals to your speakers with wire of

the proper gauge, cut as short as possible. If the connections are

faulty, no sound will be heard from the speakers. Make sure that the

polarity of the speaker wires is correct, that is, + and – markings are

observed. If these wires are reversed, the sound will be unnatural

and will lack bass. Do not let the bare speaker wires touch each

other or any other metal part as this could damage this unit and/or

speakers.

NOTE: Use speakers with the specified impedance shown on the

rear of this unit.

For connecting to the MAIN and CENTER SPEAKERS terminals.

Red: positive (+)

Black: negative (–)

➀ Unscrew the knob.

➁ Insert the bare wire.

[Remove approx. 5mm (1/4”)

insulation from the speaker

wires.]

➂ Tighten the knob and

secure the wire.

NOTE: Banana Plug connections are also possible (except for

Scandinavian models). Simply insert the Banana Plug connector into

the corresponding terminal.

For connecting to the REAR SPEAKERS terminals.

Red: positive (+)

Black: negative (–)

➀ Press down the tab.

➁ Insert the bare wire.

[Remove approx. 5mm (1/4”)

insulation from the speaker

wires.]

➂ Press up the tab and secure

the wire.

➀

➁

➂

CONNECTING THE MAIN SPEAKERS AND THE

REAR EFFECT SPEAKERS TO THIS UNIT

Connect the MAIN speakers to the MAIN SPEAKERS terminals

of this unit.

Connect the REAR effect speakers to the REAR SPEAKERS

terminals of this unit.

CONNECTING THE CENTER SPEAKER(S) TO THIS

UNIT

Connect the CENTER speaker to the CENTER SPEAKERS

terminals. One or two CENTER speakers can be connected to this

unit. For the respective connections, follow the methods figured

below. If, however, you will not be using a CENTER speaker, be sure

to set the Center Mode to “PHNTM” (phantom). (See page 22.)

For connecting one CENTER speaker

SINGLE

DUAL

SINGLE

Center speaker

Main speakers

R L

SINGLE

DUAL

SINGLE

Rear effect speakers

R L

For connecting two CENTER speakers

ADDING A SUBWOOFER

You may wish to add a subwoofer to reinforce the bass

frequencies.

This unit provides a line-level subwoofer output, which contains

only the frequencies under 200 Hz from the main and center

channels. Connect the LOW PASS jack to the INPUT jack of the

subwoofer amplifier, and connect the speaker terminals of the

subwoofer amplifier to the subwoofer.

With some subwoofers, including the Yamaha Active Servo

Processing Subwoofer System, the amplifier and subwoofer are in

the same unit.

Center speaker

SINGLE

DUAL

SINGLE

Center speaker

DUAL

SINGLE

10dB 0dB

Subwoofer system

ADDITIONAL INFORMATION ON CONNECTING

SPEAKERS

(for Europe, U.K. and Australia models)

This unit is equipped with line output jacks for main, rear effect

and center channels.

If you will use an external power amplifier for driving main

speakers, connect input jacks of the external power amplifier to the

MAIN OUTPUT jacks of this unit. (See Figure.)

For connecting an external power amplifier for driving rear effect

speakers or center speaker to this unit, connect it to the

corresponding line output jack(s) (REAR OUTPUT or CENTER

OUTPUT) of this unit in the same way. (See Figure.)

NOTE: Even if an external power amplifier is connected to the MAIN,

REAR or CENTER OUTPUT jacks, the corresponding internal

amplifier will not be turned off and output will be available at the

speaker terminals.

REAR

I0dB 0dB

MAIN

CENTER

LOWPASS MAIN

LEVEL

fc:200Hz

L R

OUTPUT

Main speakers

Power amplifier

Monaural power amplifier

Power amplifier

Center speaker

Rear effect speakers

1-3. CONTROLS & ADJUSTMENTS

FRONT PANEL

1 Power Switch

* STANDBY Mode (Europe model only)

While the power is on, pressing the POWER key on the remote

control unit switches the unit to the STANDBY mode. (In this

mode, the indicator is half illuminated.)

2 Remote control sensor

Signals from the remote control unit are received here.

3 Input Trim Control

Adjusts the input level of each source respectively.

4 Display Panel

Shows program names, parameters and information about other

various settings and adjustments.

NATURAL SOUND DIGITAL SOUND FIELD PROCESSING AMPLIFIER DSP-A780

DSP

PRO LOGIC

12345678

FEDCBA09

(General Model)

5 PRO LOGIC Indicator

Illuminates while the built-in Dolby Pro Logic Surround Decoder is

being activated.

6 DSP Indicator

Illuminates while the built-in Sound Field Processor is being

activated.

7 Input Selector Switch

Sequentially selects the input source that you want to listen to

and/or watch in the

corresponding to the selected input source illuminates. The

selected input source is also shown by the display panel and

the monitor screen (When the monitor is on).

8 Input Selector Switches for VCR 1, CD and LD

Directly selects VCR 1, CD or LD as the input source.

9 Phones Jack

Plug in headphones here for private listening. If the Center

Mode is set to “PHNTM” (phantom), the center channel will be

heard along with the main channels. (See page 22.) Otherwise

the main channels only will be heard.

0 Auxiliary Input Jacks (AUX 2)

Connect an auxiliary video or audio input source equipment

such as a camcorder to these jacks. If the connected video

equipment has a S video output terminal, connect it to the S

VIDEO jack to obtain a high resolution picture. The source

connected to these jacks can be selected by the input selector

switch.

A Rec Out Switch

Used to select the source to be recorded to tape deck or VCR

independent of the selection of input source. When pressed,

the indicator corresponding to the currently selected source to

be recorded flashes. While an indicator is flashing, you can

change the selection of the source to be recorded with the

input selector switches. The selected source is also shown by

the display panel and the monitor screen (when the monitor is

on).

B Bass and Treble Controls

Adjust the sound to match your tastes. Can also be used to

compensate for room acoustics. Defeated in the center

position.

C Program Selector

Sequentially selects the digital sound field processing

programs in the + or – direction.

D Balance Control

Adjusts the left and right output volume to the Main Speakers

to compensate for sound imbalance caused by speaker

positions or listening room conditions.

E Effect Switch

Normally ON, this switch can be turned OFF to disable output

from the center and effect speakers so that the sound

becomes normal 2-channel stereo.

F Master Volume Control

Simultaneously controls signal level at all outputs: main, rear

effect, center, and subwoofer. (This does not affect TAPE REC

OUT level.)

REMOTE CONTROL UNIT

1 Power Key

Turns this unit on and off.

* (Europe model only): Turns the POWER on mode to the

STANDBY mode and vice versa.

2 CD Function Keys

Operate functions on Yamaha CD players designed for remote

control compatibility.

* DISC SKIP is applicable only to compact disc changer.

3 Tape Deck Function Keys

Operate functions on Yamaha tape decks designed for remote

control compatibility.

* DIR A, B and DECK A/B are applicable only to double

cassette tape deck.

* For a single cassette deck with automatic reverse function,

pressing DIR A will reverse the direction of tape running.

4 Program Select Keys (1 through 16)

Select DSP programs 1 through 16.

5 Test Switch

When pressed, sends a signal to the main left, center, main

right, and rear effect speakers in turn for easy comparison of

level settings.

6 Set Menu/Parameter +/– Keys

Edit DSP program parameters, make settings/adjustments in the

SET MENU mode, or used in the main/center/effect speaker level

balance adjustment.

7 Effect On/Off Key

Cuts off the sound’s output from the rear effect and center

speakers. To restore the output from those speakers, press this

key again.

SKIP

POWER

PAUSE/STOP

PLAY CD

TUNER

A/B/C/D/E

PRESET

DISC

SKIP

TAPE

VCR 1

VCR 2

AUX 1

AUX 2

MASTER

VOLUME

DECK

A/B DIR A PLAY DIR B

STOP

REC/PAUSE

ROCK CNCTJAZZ CLUB

CHURCHHALL

ANIMATION

CLASSIC

FILM

OPERA

CONCERT

VIDEO

KARAOKE

GAME

SPORTS

THEATER

ENHANCED

PRO LOGIC

70 mm MOVIE

1 THEATER 2

TEST

EFFECT MUTING

SET MENU

PARAMETER

Strona się ładuje...

Yamaha DSP -A780 Instrukcja obsługi

Marka: Yamaha

Model: DSP -A780

Kategoria: Sprzęt muzyczny

Typ: Instrukcja obsługi

Niniejsza instrukcja jest również odpowiednia dla

DSP-A780

Pobierz PDF

raport

w innych językach

čeština: Yamaha DSP -A780 Uživatelský manuál
español: Yamaha DSP -A780 Manual de usuario
italiano: Yamaha DSP -A780 Manuale utente
Deutsch: Yamaha DSP -A780 Benutzerhandbuch
svenska: Yamaha DSP -A780 Användarmanual
português: Yamaha DSP -A780 Manual do usuário
français: Yamaha DSP -A780 Manuel utilisateur
Türkçe: Yamaha DSP -A780 Kullanım kılavuzu
English: Yamaha DSP -A780 User manual
dansk: Yamaha DSP -A780 Brugermanual
русский: Yamaha DSP -A780 Руководство пользователя
suomi: Yamaha DSP -A780 Ohjekirja
Nederlands: Yamaha DSP -A780 Handleiding
română: Yamaha DSP -A780 Manual de utilizare

Powiązane artykuły

Inne dokumenty

Project Source F330 Instrukcja obsługi