Sony KV-21FX20K Instrukcja obsługi

R

KV-21FX20K

4-204-905-91(1)

FD Trinitron

Colour Television

Instruction Manual

GB

HU

Kezelési útmutató

PL

Instrukcja obsługi

2

3

GB

Instruction Manual

Thank you for choosing this Sony TV.

Before operating the TV, please read this manual thoroughly and retain it for

future reference.

Keys to read this Instruction Manual:

• Use Getting Started if you wish to install the TV set and to get familiar with the

basic functions.

• Use Advanced Operation if you wish to know more about the additional features

of the TV set.

• Symbols used in the manual:

• Informs you of possible hazards

• Important information

• Information on a feature

• 1, 2 ... Sequence of instructions

• Shaded buttons on the remote control show the buttons you have to

press to follow the sequence of instructions.

• Informs you of the result of the instructions.

• The process continues on the next page to get final result.

MENU

K

4

Safety Information

WARNING

For Your Safety

All TVs operate on extremely high voltages. To prevent fire or electric shock, please follow the safety

procedures indicated below.

For General Safety

• Do not expose the TV set to rain or moisture.

• Do not remove the rear cover.

• For your protection, refer all servicing to qualified personnel only.

For Safe Installation

• Do not install the TV in hot, humid or excessively dusty places.

• Do not block or cover the ventilation openings. For ventilation, leave

a space of at least 10 cm all around the set.

• Do not install the TV where it may be exposed to mechanical vibrations.

• Place the TV set only on a stable stand designed for the weight and

dimensions of the TV.

For Safe Operation

• Do not operate the TV set on anything other than a 220-240V AC, 50Hz

supply.

• Do not operate the TV if any liquid or solid objects fall in through the

ventilation slots. Have it checked immediately.

• For environmental and safety reasons, it is recommended that the TV set

is not left in standby mode when not in use. Switch off at the mains.

• Do not disconnect the TV by pulling on the power cable. Disconnect by

removing the mains plug.

• In case of a thunderstorm, disconnect the TV set from the main supply and

the aerial. Otherwise the set may be damaged by a stroke of lightning.

For Maintenance

• Clean the TV screen with a soft dampened cloth. Do not use any abrasive

cleaners.

• Dust and nicotine deposits may cause heat accumulation inside the TV set.

In the long term this could be a safety risk and may shorten the lifetime of

your TV set. Therefore have your set serviced about every five years.

5

Table of Contents

Keys to read this Instruction Manual .................................................................................................. 3

For your Safety ........................................................................................................................................ 4

Getting Started

Overview

Checking the Accessories Supplied ......................................................................................... 6

Overview of TV Buttons ........................................................................................................... 6

Overview of Remote Control Buttons ..................................................................................... 7

First Time Operation

Step 1 - Installation

Inserting Batteries into the Remote Control ........................................................................... 8

Connecting the Aerial ................................................................................................................ 8

Switching on the TV .................................................................................................................. 8

Step 2 - Basic Presetting

Selecting Language .................................................................................................................... 9

Automatically Tuning the TV using the Remote Control .................................................. 10

Changing the Programme Order of the TV channels ......................................................... 11

Advanced Operation

Advanced Presetting

Automatically Tuning the TV using the TV buttons ........................................................... 12

Manually Tuning the TV ......................................................................................................... 13

Fine Tuning Channels .............................................................................................................. 14

Adjusting the Picture Rotation ............................................................................................... 15

Skipping Programme positions ............................................................................................. 16

Advanced TV Operation

Adjusting the Picture ............................................................................................................... 17

Adjusting the Sound ................................................................................................................ 18

Using the Sleep Timer ............................................................................................................. 19

Using the Wake Up Timer ....................................................................................................... 20

Teletext

Viewing Teletext ....................................................................................................................... 21

Optional Connections

Using Optional equipment ..................................................................................................... 22

Smartlink ................................................................................................................................... 23

Additional Information

Menu Guide .............................................................................................................................. 24

Troubleshooting ........................................................................................................................ 25

Specifications ............................................................................................................................ 26

GB

6

Getting Started - Overview

Checking the Accessories Supplied

Overview of TV Buttons

One Remote Control

(RM-887)

Two batteries (R6 type)

Getting Started - Overview

On/Off Switch

Standby

indicator

Press the flap on the front of the TV

to reveal the front control panel

(press on the mark )

S

RM

887

PROGR

MENU

1

4

7

2

5

8

0

3

6

9

K

Programme

Up or Down

buttons

(Selects TV

channels)

Phono

Video

Input

jack

Selecting

Input

source

Volume

control

buttons

Audio

Inputs

jacks

Headphone jack Auto Tune button

7

S

RM

887

PROGR

MENU

1

4

7

2

5

8

0

3

6

9

K

Getting Started - Overview

Overview of Remote Control Buttons

To Temporarily Switch Off TV

Press to temporarily switch off TV (the

standby indicator on TV lights up). Press

again to switch on TV from standby mode.

To save energy we recommend switching off

completely when TV is not in use.

After 15-30 minutes without a TV

signal and without any button being

pressed, the TV switches automatically

into standby mode.

Selecting Input source

Press repeatedly until the desired input

symbol of the source appears on the TV

screen.

Back to the channel last watched

Press to watch the last channel selected

(watched for at least 5 seconds).

Displaying the menu system

Press to display the menu on the TV screen.

Press again to remove the menu display

from the TV screen.

Menu selection

Scroll Up

Scroll Down

Previous menu or selection

Next menu or selection

OK Confirms your selection

Selecting Screen format

Press to view programmes in 16:9 mode.

Press again to return to 4:3 mode.

This button only works in Teletext mode.

Function

associated to this button does

not work with this TV.

Selecting channels

Press to select the next or previous channel.

Muting the Sound

Press to mute TV sound.

Press again to restore the sound.

Displaying On Screen Information

Press to display all on-screen indications.

Press again to cancel. +.--+++++-++++

Selecting channels

Press to select channels.

For double-digit programme numbers, e.g. 23,

press -/-- first, then the buttons 2 and 3.

If you enter an incorrect first digit, this should

be corrected by entering another digit (0-9)

and then selecting -/-- button again to enter

the programme number of your choice.

+++++++++++++++...

Selecting TV mode

Press to switch off Teletext or video input.

+++++++++++++++++...

Selecting Teletext

Press to switch on Teletext.

Selecting Sound mode

Press to change the sound mode.

+++++++++++++++++...

Selecting Picture mode

Press to change the picture mode.

+++++++++++++++++...

Adjusting TV Volume

Press to adjust the volume of the TV.

Besides TV functions, all coloured buttons as well as green symbols are also used for Teletext operation. For more details,

please refer to the "Teletext" section of this instruction manual.

8

First Time Operation - Installation

Make sure to insert the batteries using the correct polarities.

Always remember to dispose of used batteries in an environmental friendly way.

Connecting the Aerial

Connect the TV plug to the mains socket (220-240V AC, 50Hz).

Switching on the TV

Inserting Batteries into the Remote Control

Push in the On/Off switch on the front of the TV.

Connect a conventional aerial to the socket

marked on the rear of the TV.

9

First Time Operation - Basic Presetting

Selecting Language

Use this function to change the language of the menu screens.

The first time that you switch on your TV, the Language menu appears automatically.

However, if you need to change the language menu afterwards, select the menu LANGUAGE in the

(SET UP) menu

and proceed in the same way as described below.

1 Press the on/off button on your TV set to switch on your TV. The

first time you press the on/off button on your TV set, the language

menu displays automatically on the TV screen.

2 Press the or button on the remote control to select the

language, then press the OK button to confirm your selection.

The Auto Tuning menu appears on the TV screen in the selected language.

First Time Operation - Basic Presetting

LANGUAGE

Select language:

ENGLISH

DEUTSCH

FRANÇAIS

ITALIANO

ESPAÑOL

NEDERLANDS

EΛΛHNIKA

POLSKI

Č

ESKI

MAGYAR

T

Ü

RKÇE

Do you want to start

automatic tuning?

YES

NO

LANGUAGE

ENGLISH

DEUTSCH

FRANÇAIS

ITALIANO

ESPAÑOL

NEDERLANDS

EΛΛHNIKA

POLSKI

ČESKI

MAGYAR

T

ÜRKÇE

Select language:

S

RM

887

PROGR

MENU

1

4

7

2

5

8

0

3

6

9

K

LANGUAGE

Select language:

ENGLISH

DEUTSCH

FRANÇAIS

ITALIANO

ESPAÑOL

NEDERLANDS

EΛΛHNIKA

POLSKI

Č

ESKI

MAGYAR

T

Ü

RKÇE

10

First Time Operation - Basic Presetting

Automatically Tuning the TV using the Remote Control

You need to tune the TV to receive channels (TV Broadcast). By following the instructions below, this TV automatically

searches and stores all available channels for you.

After having selected the language, a new menu appears automatically on the TV screen asking you to automatically tune

the TV. However, if you need to change or repeat the tuning afterwards (e.g. when you move house), select the menu

AUTO PROGRAMME in the (SET UP) menu and proceed in the same way as described below in step 1 or, please refer

to the section "Automatically Tuning the TV using the TV buttons" of this instruction manual.

1 Press the OK button on the remote control to select YES.

A new menu appears automatically on the screen asking you to

check that the antenna is connected.

2 Confirm that the antenna is connected and then press the OK

button.

The automatic tuning starts and the message "Searching..." flashes

on the screen.

This procedure could take some minutes.

When the automatic tuning is finished, the Programme Sorting menu

appears on the TV screen.

Notes: • To stop the automatic tuning, press the MENU button.

• If you stop the automatic tuning by pressing the MENU

button, the Programme Sorting menu does not appear

automatically on the TV screen.

First Time Operation - Basic Presetting

Do you want to start

automatic tuning?

YES

NO

Please confirm that

antenna is connected

CONFIRM

AUTO PROGRAMME

PROGRAMME:

SYSTEM:

CHANNEL:

Searching...

01

B/G

C 21

01

Select Channel:

Select new position:

Confirm:

Exit:

PROGRAMME SORTING

PROGR

PROGRAMME:

CONFIRM

MENU

03

S

RM

887

PROGR

MENU

1

4

7

2

5

8

0

3

6

9

K

Do you want to start

automatic tuning?

YES

NO

11

a) If you do not wish to change the channel order:

1 Press the MENU button to exit and return to the normal TV screen.

Your TV is now ready for use.

b) If you wish to change the channel order:

1 Press the PROGR or button until the channel (TV Broadcast) you

wish to rearrange appears on the screen.

2 Press the or button to select the new programme number

position for your selected channel (TV Broadcast), then press the

OK button.

The word CONFIRM is highlighted for a few seconds to

confirm that the new programme position is stored.

3 Repeat steps 1 and 2 if you wish to change the order of the other

channels on your TV.

4 Press the MENU button to exit and return to the normal TV screen.

Your TV is now ready for use.

First Time Operation - Basic Presetting

Changing the Programme Order of the TV channels

After all available channels (TV Broadcast) are captioned and stored, a new menu appears automatically on the screen to

change the order in which the channels appear on the screen.

However, if you wish to rearrange the order of the channels afterwards, select the menu PROGRAMME SORTING in the

(SET UP) menu and proceed in the same way as described in the b) section of this chapter.

01

Select Channel:

Select new position:

Confirm:

Exit:

PROGRAMME SORTING

PROGR

PROGRAMME:

CONFIRM

MENU

03

02

Select Channel:

Select new position:

Confirm:

Exit:

PROGRAMME SORTING

PROGR

PROGRAMME:

CONFIRM

MENU

04

S

RM

887

PROGR

MENU

1

4

7

2

5

8

0

3

6

9

K

01

Select Channel:

Select new position:

Confirm:

Exit:

PROGRAMME SORTING

PROGR

PROGRAMME:

CONFIRM

MENU

03

01

Select Channel:

Select new position:

Confirm:

Exit:

PROGRAMME SORTING

PROGR

PROGRAMME:

CONFIRM

MENU

03

01

Select Channel:

Select new position:

Confirm:

Exit:

PROGRAMME SORTING

PROGR

PROGRAMME:

CONFIRM

MENU

03

12

Advanced Operation - Advanced Presetting

Automatically Tuning the TV using the TV buttons

Besides the explanation in the section “Automatically Tuning the TV using the Remote Control“, by following the

instructions below, this TV also searches and stores automatically all available channels using just one button of the TV set.

1 Press the flap on the front of the TV by pressing on the mark to

reveal the front control panel.

2 Press and hold in the button on the TV set for some seconds,

until a menu appears automatically on the screen asking you to

check that antenna is connected.

3 Confirm that the antenna is connected and then press the OK

button.

The automatic tuning starts and the message "Searching..." flashes

on the screen.

This procedure could take some minutes.

When the automatic tuning procedure is complete, the menu disappears

from the TV screen and your TV is now ready for use.

Note: To stop the automatic tuning, press the MENU button on the

remote control.

Advanced Operation - Advanced Presetting

S

RM

887

PROGR

MENU

1

4

7

2

5

8

0

3

6

9

K

AUTO PROGRAMME

PROGRAMME:

SYSTEM:

CHANNEL:

Searching...

01

B/G

C 21

Please confirm that

antenna is connected

CONFIRM

Please confirm that

antenna is connected

CONFIRM

Please confirm that

antenna is connected

CONFIRM

13

Advanced Operation - Advanced Presetting

Manually Tuning the TV

Use this function to preset channels or a video input source one by one to the programme order of your choice.

1 Press the MENU button on the remote control to display the

menu on the TV screen.

2 Press the button to select the symbol, then press the

button to enter to the SET UP menu.

3 Press the button to select MANUAL PROGRAMME, then

press the

button.

4 With the cursor highlighting PROGRAMME, press the button

and then, press the

or button to select on which programme

number you want to preset a channel. Press the

button.

5 Press the button to select SYSTEM, then press the button.

Press

or button to select the TV broadcast system (B/G for

western European countries, D/K for eastern European

countries). Press the button.

6 Press the button to select CHANNEL, then press the button.

Press

or button to select the channel tuning, "C" for

terrestrial channels or "S" for cable channels. Press the

button.

7 Press the number buttons to enter the channel number of the TV

Broadcast or press the

or button to search for the next

available channel.

If you do not wish to store this channel, press the or button

to continue searching for the desired channel.

8 If this is the desired channel you wish to store, press the OK

button and then, with the cursor highlighting CONFIRM, press

the OK button again.

9 Repeat steps 4 to 8 if you wish to store more channels.

10 Press the MENU button to exit and return to the normal TV

screen.

Your TV is now ready for use.

PICTURE CONTROL

CONTRAST

BRIGHTNESS

COLOUR

SHARPNESS

HUE

RESET

MODE: PERSONAL

0

SET UP

PICTURE ROTATION:

LANGUAGE: ENGLISH

AUTO PROGRAMME

PROGRAMME SORTING

MANUAL PROGRAMME

0

SET UP

PICTURE ROTATION:

LANGUAGE: ENGLISH

AUTO PROGRAMME

PROGRAMME SORTING

MANUAL PROGRAMME

01

B/G

C 21

ON

NO

OFF

SET UP:

MANUAL PROGRAMME

CONFIRM

PROGRAMME:

SYSTEM:

CHANNEL:

AFT:

SKIP:

DECODER:

SET UP:

MANUAL PROGRAMME

CONFIRM

PROGRAMME:

SYSTEM:

CHANNEL:

AFT:

SKIP:

DECODER:

01

B/G

C 21

ON

NO

OFF

01

B/G

C 21

ON

NO

OFF

SET UP:

MANUAL PROGRAMME

CONFIRM

PROGRAMME:

SYSTEM:

CHANNEL:

AFT:

SKIP:

DECODER:

S

RM

887

PROGR

MENU

1

4

7

2

5

8

0

3

6

9

K

PICTURE CONTROL

CONTRAST

BRIGHTNESS

COLOUR

SHARPNESS

HUE

RESET

MODE: PERSONAL

01

B/G

C 21

ON

NO

OFF

SET UP:

MANUAL PROGRAMME

CONFIRM

PROGRAMME:

SYSTEM:

CHANNEL:

AFT:

SKIP:

DECODER:

01

B/G

C 21

ON

NO

OFF

SET UP:

MANUAL PROGRAMME

CONFIRM

PROGRAMME:

SYSTEM:

CHANNEL:

AFT:

SKIP:

DECODER:

14

Advanced Operation - Advanced Presetting

Fine Tuning Channels

Normally, the automatic fine tuning (AFT) function is operating. If the picture is distorted, however, you can manually fine

tune the TV to obtain a better picture reception.

1 Select the channel (TV Broadcast) you wish to fine tune, then press

the MENU button on the remote control to display the menu on the

TV screen.

2 Press the button to select the symbol, then press the button

to enter to the SET UP menu.

3 Press the button to select MANUAL PROGRAMME, then press

the

button.

4 Press the button to select AFT, then press the button.

5 Press the or button to adjust the fine tuning (-15 to +15), then

press the OK button.

6 With the cursor highlighting CONFIRM, press the OK button to

store.

7 Press the MENU button to exit and return to the normal TV screen.

8 Repeat steps 1 to 7 to fine tune other channels.

Your TV is now ready for use.

0

SET UP

PICTURE ROTATION:

LANGUAGE: ENGLISH

AUTO PROGRAMME

PROGRAMME SORTING

MANUAL PROGRAMME

0

SET UP

PICTURE ROTATION:

LANGUAGE: ENGLISH

AUTO PROGRAMME

PROGRAMME SORTING

MANUAL PROGRAMME

SET UP:

MANUAL PROGRAMME

CONFIRM

PROGRAMME:

SYSTEM:

CHANNEL:

AFT:

SKIP:

DECODER:

01

B/G

C 21

+2

NO

OFF

01

B/G

C 21

+2

NO

OFF

SET UP:

MANUAL PROGRAMME

CONFIRM

PROGRAMME:

SYSTEM:

CHANNEL:

AFT:

SKIP:

DECODER:

01

B/G

C 21

ON

NO

OFF

SET UP:

MANUAL PROGRAMME

CONFIRM

PROGRAMME:

SYSTEM:

CHANNEL:

AFT:

SKIP:

DECODER:

S

RM

887

PROGR

MENU

1

4

7

2

5

8

0

3

6

9

K

PICTURE CONTROL

CONTRAST

BRIGHTNESS

COLOUR

SHARPNESS

HUE

RESET

MODE: PERSONAL

PICTURE CONTROL

CONTRAST

BRIGHTNESS

COLOUR

SHARPNESS

HUE

RESET

MODE: PERSONAL

15

Advanced Operation - Advanced Presetting

Adjusting the Picture Rotation

Because of the earth's magnetism, the picture might slant. In this case, you can correct the picture slanting.

1 Press the MENU button on the remote control to display the menu

on the TV screen.

2 Press the button to select the symbol, then press the button

to enter to the SET UP menu.

3 With the cursor highlighting PICTURE ROTATION, press the

button.

4 Press the or button to adjust the picture rotation (adjusting

range is -5 to +5), then press the OK button.

5 Press the MENU button to exit and return to the normal TV screen.

Your TV is now ready for use.

0

SET UP

PICTURE ROTATION:

LANGUAGE: ENGLISH

AUTO PROGRAMME

PROGRAMME SORTING

MANUAL PROGRAMME

0

SET UP

PICTURE ROTATION:

LANGUAGE: ENGLISH

AUTO PROGRAMME

PROGRAMME SORTING

MANUAL PROGRAMME

+2

SET UP

PICTURE ROTATION:

LANGUAGE: ENGLISH

AUTO PROGRAMME

PROGRAMME SORTING

MANUAL PROGRAMME

S

RM

887

PROGR

MENU

1

4

7

2

5

8

0

3

6

9

K

PICTURE CONTROL

CONTRAST

BRIGHTNESS

COLOUR

SHARPNESS

HUE

RESET

MODE: PERSONAL

PICTURE CONTROL

CONTRAST

BRIGHTNESS

COLOUR

SHARPNESS

HUE

RESET

MODE: PERSONAL

16

Advanced Operation - Advanced Presetting

Skipping Programme positions

You can programme this TV to skip any unwanted programme numbers when they are selected with the PROGR +/-

buttons. To cancel this function afterwards, proceed in the same way as described below by selecting NO instead of YES in

step 6.

1 Press the MENU button on the remote control to display the menu

on the TV screen.

2 Press the button to select the symbol, then press the button

to enter to the SET UP menu.

3 Press the button to select MANUAL PROGRAMME, then press

the button.

4 With the cursor highlighting PROGRAMME, press the PROGR

or button until the programme you want to skip appears on the

screen.

5 Press the button to select SKIP, then press the button.

6 Press the button to select YES, then press the OK button.

7 With the cursor highlighting CONFIRM, press the OK button.

8 Repeat steps 4 to 7 to skip other unused programme positions.

9 Press the MENU button to exit and return to the normal TV screen.

When changing channels (TV Broadcasts) with the PROGR +/- buttons,

the skipped programme positions do not appear. You can, however, still

select them using the number buttons.

0

SET UP

PICTURE ROTATION:

LANGUAGE: ENGLISH

AUTO PROGRAMME

PROGRAMME SORTING

MANUAL PROGRAMME

0

SET UP

PICTURE ROTATION:

LANGUAGE: ENGLISH

AUTO PROGRAMME

PROGRAMME SORTING

MANUAL PROGRAMME

01

B/G

C 21

ON

NO

OFF

SET UP:

MANUAL PROGRAMME

CONFIRM

PROGRAMME:

SYSTEM:

CHANNEL:

AFT:

SKIP:

DECODER:

05

B/G

C 21

ON

NO

OFF

SET UP:

MANUAL PROGRAMME

CONFIRM

PROGRAMME:

SYSTEM:

CHANNEL:

AFT:

SKIP:

DECODER:

SET UP:

MANUAL PROGRAMME

CONFIRM

PROGRAMME:

SYSTEM:

CHANNEL:

AFT:

SKIP:

DECODER:

05

B/G

C 21

ON

YES

OFF

05

B/G

C 21

ON

YES

OFF

SET UP:

MANUAL PROGRAMME

CONFIRM

PROGRAMME:

SYSTEM:

CHANNEL:

AFT:

SKIP:

DECODER:

S

RM

887

PROGR

MENU

1

4

7

2

5

8

0

3

6

9

K

PICTURE CONTROL

CONTRAST

BRIGHTNESS

COLOUR

SHARPNESS

HUE

RESET

MODE: PERSONAL

PICTURE CONTROL

CONTRAST

BRIGHTNESS

COLOUR

SHARPNESS

HUE

RESET

MODE: PERSONAL

17

1 Press the MENU button on the remote control to display the menu

on the TV screen.

2 Press the button to enter to the PICTURE CONTROL menu.

3 Press the or button to select the item you wish to change.

4 With the cursor highlighting the item you wish to change, press the

button.

(Refer to the table below for the effect of each control).

5 Press the / or / button to alter the selected item, then

press the OK button to store the new adjustment.

6 Repeat steps 3 to 5 to alter the other items.

7 Press the MENU button to exit and return to the normal TV screen.

PICTURE CONTROL OPERATION / EFFECT

MODE PERSONAL (for individual settings)

LIVE (for live broadcast programmes)

MOVIE (for films)

CONTRAST Less More

BRIGHTNESS* Darker Brighter

COLOUR* Less More

SHARPNESS* Softer Sharper

HUE** Greenish Reddish

RESET Resets picture to the factory preset levels.

* Can be only altered if PERSONAL MODE is selected.

** Only avalaible for NTSC colour signal (e.g: US video tapes).

Advanced Operation - Advanced TV Operation

Adjusting the Picture

Although the picture is adjusted at the factory, you can modify it to suit your own taste.

Changing Picture Mode Quickly

1 Press the button on the remote control to directly access the

PICTURE MODE.

2 Press the button to select your desired picture mode

(PERSONAL, LIVE or MOVIE).

Advanced Operation - Advanced TV Operation

PICTURE CONTROL

CONTRAST

BRIGHTNESS

COLOUR

SHARPNESS

HUE

RESET

MODE: PERSONAL

PICTURE CONTROL

MODE: PERSONAL

CONTRAST

BRIGHTNESS

COLOUR

SHARPNESS

HUE

RESET

PICTURE CONTROL

MODE: PERSONAL

CONTRAST

BRIGHTNESS

COLOUR

SHARPNESS

HUE

RESET

PICTURE MODE:

LIVE

S

RM

887

PROGR

MENU

1

4

7

2

5

8

0

3

6

9

K

PICTURE CONTROL

CONTRAST

BRIGHTNESS

COLOUR

SHARPNESS

HUE

RESET

MODE: PERSONAL

PICTURE CONTROL

CONTRAST

BRIGHTNESS

COLOUR

SHARPNESS

HUE

RESET

MODE: PERSONAL

PICTURE MODE:

PERSONAL

PICTURE MODE:

PERSONAL

18

1 Press the MENU button on the remote control to display the menu

on the TV screen.

2 Press the button to select the symbol, then press the button

to enter to the SOUND CONTROL menu.

3 Press the or button to select the item you wish to change.

4 With the cursor highlighting the item you wish to change, press the

button.

(Refer to the table below for the effect of each control).

5 Press the / or / button to alter the selected item, then

press the OK button to store the new adjustment.

6 Repeat steps 3 to 5 to alter the other items.

7 Press the MENU button to exit and return to the normal TV screen.

SOUND CONTROL OPERATION / EFFECT

MODE PERSONAL (for individual settings)

JAZZ

POP

ROCK

TREBLE* Less More

BASS* Less More

BALANCE Left Right

DUAL SOUND • For a stereo broadcast:

MONO

STEREO

• For a bilingual broadcast:

A (for channel 1 or Mono sound)

B (for channel 2)

DSP (Digital sound Processor) ON OFF

RESET Resets sound to the factory preset levels.

*

Can be only altered if PERSONAL MODE is selected.

Advanced Operation - Advanced TV Operation

Adjusting the Sound

Although the sound is adjusted at the factory, you can modify it to suit your own taste.

Changing Sound Mode Quickly

1 Press the button on the remote control to access directly to the

SOUND MODE.

2 Press the button to select your desired sound mode

(PERSONAL, JAZZ, POP or ROCK).

Advanced Operation - Advanced TV Operation

STEREO

ON

SOUND CONTROL

TREBLE

BASS

BALANCE

DUAL SOUND:

DSP:

RESET

MODE: PERSONAL

STEREO

ON

SOUND CONTROL

MODE: PERSONAL

TREBLE

BASS

BALANCE

DUAL SOUND:

DSP:

RESET

STEREO

ON

SOUND CONTROL

MODE: PERSONAL

TREBLE

BASS

BALANCE

DUAL SOUND:

DSP:

RESET

SOUND MODE:

PERSONAL

SOUND MODE:

POP

S

RM

887

PROGR

MENU

1

4

7

2

5

8

0

3

6

9

K

PICTURE CONTROL

CONTRAST

BRIGHTNESS

COLOUR

SHARPNESS

HUE

RESET

MODE: PERSONAL

PICTURE CONTROL

CONTRAST

BRIGHTNESS

COLOUR

SHARPNESS

HUE

RESET

MODE: PERSONAL

SOUND MODE:

PERSONAL

19

Advanced Operation - Advanced TV Operation

Using the Sleep Timer

You can select a time period for the TV to switch itself automatically into the standby mode.

1 Press the MENU button on the remote control to display the menu

on the TV screen.

2 Press the button to select the symbol, then press the button

to enter to the TIMER menu.

3 With the cursor highlighting OFF TIMER, press the button.

4 Press the or button to set the time period delay

OFF

0:15 min.

0:30 min.

...

4:00 hours

5 Press the OK button.

6 Press the MENU button to exit and return to the normal TV screen.

One minute before the TV switches into standby mode, the time remaining

is displayed on the TV screen automatically.

Notes: • When watching the TV, press the

button to display the

time remaining.

• To return to normal operation from standby mode,

press the

button.

Advanced Operation - Advanced TV Operation

TIMER

OFF TIMER:

ON TIMER:

0:15

OFF

TIMER

OFF TIMER:

ON TIMER:

OFF

TIMER

OFF TIMER:

ON TIMER:

S

RM

887

PROGR

MENU

1

4

7

2

5

8

0

3

6

9

K

PICTURE CONTROL

CONTRAST

BRIGHTNESS

COLOUR

SHARPNESS

HUE

RESET

MODE: PERSONAL

PICTURE CONTROL

CONTRAST

BRIGHTNESS

COLOUR

SHARPNESS

HUE

RESET

MODE: PERSONAL

20

Advanced Operation - Advanced TV Operation

Using the Wake Up Timer

You can select a time period for the TV to switch itself automatically on from standby mode.

Advanced Operation - Advanced TV Operation

1 Press the MENU button on the remote control to display the menu

on the TV screen.

2 Press the button to select the symbol, then press the button

to enter to the TIMER menu.

3 Press the button to select ON TIMER, then press the button.

4 Press the or button to set the time period

OFF

0:15 min.

0:30 min.

...

12:00 hours

5 Press the OK button.

6 Press the MENU button to exit and return to the normal TV screen.

7 Press the standby button .

The standby indicator on the TV flashes regularly to indicate that the

Wake Up timer is active. After the selected length of time, the TV switches

on automatically.

Notes: • If you use the "Wake Up Timer" to switch the TV on and

keep it on for one hour without pressing any TV or remote

control button, the TV switches itself back into Standby

mode and the indicator on the TV lights.

• Any temporary power failure causes a misfunction in the

"Wake Up Timer" and you will have to reset the "Wake Up

timer".

OFF

TIMER

OFF TIMER:

ON TIMER:

OFF

TIMER

OFF TIMER:

ON TIMER:

TIMER

OFF TIMER:

ON TIMER:

OFF

10:30

S

RM

887

PROGR

MENU

1

4

7

2

5

8

0

3

6

9

K

PICTURE CONTROL

CONTRAST

BRIGHTNESS

COLOUR

SHARPNESS

HUE

RESET

MODE: PERSONAL

PICTURE CONTROL

CONTRAST

BRIGHTNESS

COLOUR

SHARPNESS

HUE

RESET

MODE: PERSONAL

Strona jest ładowana ...

Sony KV-21FX20K Instrukcja obsługi

Sony KV-21FX20K Instrukcja obsługi

w innych językach

Powiązane dokumenty