Yamaha CDC-645 Instrukcja obsługi

Marka: Yamaha

Model: CDC-645

Kategoria: Odtwarzacze CD

Typ: Instrukcja obsługi

IMPORTANT!

Please record the serial number of this

unit in the space below.

Model:

Serial No.:

The serial number is located on the rear

of the unit.

Retain this Owner’s Manual in a safe

place for future reference.

WARNING

TO REDUCE THE RISK OF FIRE OR

ELECTRIC SHOCK, DO NOT EXPOSE

THIS UNIT TO RAIN OR MOISTURE.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK), NO USER-SERVICEABLE

PARTS INSIDE, REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead

symbol, within an equilateral triangle,

is intended to alert you to the

presence of uninsulated “dangerous

voltage” within the product’s

enclosure that may be of sufficient

magnitude to constitute a risk of

electric shock to persons.

The exclamation point within an

equilateral triangle is intended to alert

you to the presence of important

operating and maintenance

(servicing) instructions in the

literature accompanying the

appliance.

•

Explanation of Graphical Symbols

CAUTION

Natural Sound Compact Disc Player

5-Disc Carousel Auto-changer

PLAYXCHANGE; Disc changing capability while playing another

Random Access Programmable Play

Random-Sequence Play

Single Track/Entire Disc/All Disc Repeat Play

Disc Scanning Capability Useful for Disc Searching or Disc Checking

Remote Control Capability

CD Synchronized Recording with a Compatible YAMAHA Tape Deck

CDC-645

Thank you for selecting this YAMAHA Compact Disc Player.

OWNER’S MANUAL

CONTENTS

Safety Instructions.................... 2

Connections............................. 4

Identification of Components.... 5

Loading Discs/Disc Play........... 6

Random-Sequence Play ........ 10

Program Play.......................... 11

Repeat Play............................ 13

Index Search.......................... 13

CD Synchronized Recording...14

Notes about the Remote

Control Transmitter................. 15

Notes about Handling

Compact Discs....................... 15

Troubleshooting...................... 16

Specifications......................... 16

SAFETY INSTRUCTIONS

1 Read Instructions – All the safety and operating

instructions should be read before the unit is operated.

2 Retain Instructions – The safety and operating instructions

should be retained for future reference.

3 Heed Warnings – All warnings on the unit and in the

operating instructions should be adhered to.

4 Follow Instructions – All operating and other instructions

should be followed.

5 Water and Moisture – The unit should not be used near

water – for example, near a bathtub, washbowl, kitchen

sink, laundry tub, in a wet basement, or near a swimming

pool, etc.

6 Carts and Stands – The unit should be used only with a

cart or stand that is recommended by the manufacturer.

6A A unit and cart combination should be

moved with care. Quick stops,

excessive force, and uneven surfaces

may cause the unit and cart combination

to overturn.

7 Wall or Ceiling Mounting – The unit should be mounted to

a wall or ceiling only as recommended by the

manufacturer.

8 Ventilation – The unit should be situated so that its

location or position does not interfere with its proper

ventilation. For example, the unit should not be situated

on a bed, sofa, rug, or similar surface, that may block the

ventilation openings; or placed in a built-in installation,

such as a bookcase or cabinet that may impede the flow

of air through the ventilation openings.

9 Heat – The unit should be situated away from heat

sources such as radiators, stoves, or other appliances that

produce heat.

10 Power Sources – The unit should be connected to a

power supply only of the type described in the operating

instructions or as marked on the unit.

11 Power-Cord Protection – Power-supply cords should be

routed so that they are not likely to be walked on or

pinched by items placed upon or against them, paying

particular attention to cords at plugs, convenience

receptacles, and the point where they exit from the unit.

12 Cleaning – The unit should be cleaned only as

recommended by the manufacturer.

13 Nonuse Periods – The power cord of the unit should be

unplugged from the outlet when left unused for a long

period of time.

14 Object and Liquid Entry – Care should be taken so that

objects do not fall into and liquids are not spilled into the

inside of the unit.

15 Damage Requiring Service – The unit should be serviced

by qualified service personnel when:

A. The power-supply cord or the plug has been

damaged; or

B. Objects have fallen, or liquid has been spilled into the

unit; or

C. The unit has been exposed to rain; or

D. The unit does not appear to operate normally or

exhibits a marked change in performance; or

E. The unit has been dropped, or the cabinet damaged.

16 Servicing – The user should not attempt to service the unit

beyond those means described in the operating

instructions. All other servicing should be referred to

qualified service personnel.

17 Power Lines – An outdoor antenna should be located

away from power lines.

18 Grounding or Polarization – Precautions should be taken

so that the grounding or polarization is not defeated.

1 To ensure the finest performance, please read this manual

carefully. Keep it in a safe place for future reference.

2 Install your unit in a cool, dry, clean place – away from

windows, heat sources, and too much vibration, dust,

moisture or cold. Avoid sources of hum (transformers,

motors). To prevent fire or electrical shock, do not expose

to rain and water.

3 Do not operate the unit upside-down. It may overheat,

possibly causing damage.

4 Never open the cabinet. If a foreign object drops into the

set, contact your dealer.

5 Do not use force on switches, knobs or cords. When

moving the set, first turn the unit off. Then gently

disconnect the power plug and the cords connecting to

other equipment. Never pull the cord itself.

6 Do not attempt to clean the unit with chemical solvents;

this might damage the finish. Use a clean, dry cloth.

7 Be sure to read the “TROUBLESHOOTING” section on

common operating errors before concluding that your unit

is faulty.

CAUTION FOR CARRYING THIS UNIT

Be sure not to carry or tip the unit with discs remaining in it.

CAUTION FOR MOVING THIS UNIT

When moving this unit, first remove all discs from the disc

tray and close the tray by pressing the OPEN/CLOSE

button, and then switch off the power after you confirm that

the display has turned as follows.

Never switch off the power if the display does not turn as

above, otherwise the unit will get out of order during

moving because the internal mechanism is not locked.

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT

As the laser beam used in this compact disc player is harmful

to the eyes, do not attempt to disassemble the cabinet. Refer

servicing to qualified personel only.

To avoid electrical shock, do not open the unit. Refer

servicing to qualified personnel only.

DANGER: The use of optical instrument with this product will

increase eye hazard.

CAUTION

Use of controls or adjustments or performance of

procedures other than those specified herein may result in

hazardous radiation exposure.

DANGER

Invisible laser radiation when open and interlock failed or

defeated.

Avoid direct exposure to beam.

The apparatus is not disconnected from the AC power

source as long as it is connected to the wall outlet, even if

the apparatus itself is turned off.

YAMAHA and the Electronic Industries Association’s

Consumer Electronics Group want you to get the most out of

your equipment by playing it at a safe level. One that lets the

sound come through loud and clear without annoying blaring or

distortion – and, most importantly, without affecting your

sensitive hearing. Since hearing damage from loud sounds is

often undetectable until it is too late, YAMAHA

and the Electronic Industries Association’s

Consumer Electronics Group recommend you to

avoid prolonged exposure from excessive

volume levels.

We Want You Listening For A Lifetime

FCC INFORMATION

1. IMPORTANT NOTICE : DO NOT MODIFY THIS UNIT!

This product, when installed as indicated in the

instructions contained in this manual, meets FCC

requirements. Modifications not expressly approved by

Yamaha may void your authority, granted by the FCC, to

use the product.

2. IMPORTANT : When connecting this product to

accessories and/or another product use only high quality

shielded cables. Cable/s supplied with this product

MUST be used. Follow all installation instructions.

Failure to follow instructions could void your FCC

authorization to use this product in the USA.

3. NOTE : This product has been tested and found to

comply with the requirements listed in FCC Regulations,

Part 15 for Class “B” digital devices. Compliance with

these requirements provides a reasonable level of

assurance that your use of this product in a residential

environment will not result in harmful interference with

other electronic devices.

This equipment generates/uses radio frequencies and, if

not installed and used according to the instructions

found in the users manual, may cause interference

harmful to the operation of other electronic devices.

Compliance with FCC regulations does not guarantee that

interference will not occur in all installations. If this product

is found to be the source of interference, which can be

determined by turning the unit “OFF” and “ON”, please try

to eliminate the problem by using one of the following

measures:

Relocate either this product or the device that is being

affected by the interference.

Utilize power outlets that are on different branch (circuit

breaker or fuse) circuits or install AC line filter/s.

In the case of radio or TV interference, relocate/reorient the

antenna. If the antenna lead-in is 300 ohm ribbon lead,

change the lead-in to coaxial type cable.

If these corrective measures do not produce satisfactory

results, please contact the local retailer authorized to

distribute this type of product. If you can not locate the

appropriate retailer, please contact Yamaha Electronics

Corp., U.S.A. 6660 Orangethorpe Ave, Buena Park, CA

90620.

The above statements apply ONLY to those products

distributed by Yamaha Corporation of America or its

subsidiaries.

WARNING

CONNECTIONS

●

Before making any connections, switch OFF the power to

the unit and the amplifier or other component.

●

Connect the “LINE OUT” terminals to the “CD” (or “AUX”)

terminals of the amplifier. If the amplifier does not have

such terminals, use the “TAPE PB” terminals. For

additional details concerning these connections, refer to the

operation instructions for the amplifier being used.

●

Be sure that the left (“L”) and right (“R”) LINE OUT terminals

are connected to the corresponding (left and right) terminals

of the amplifier or other component.

●

If the placement of this unit causes noise to other

equipment, such as a tuner, separate them from each other.

To AC outlet

This unit

Amplifier

Connection cord (included)

English

IDENTIFICATION OF COMPONENTS

FRONT PANEL

REMOTE CONTROL TRANSMITTER

The control functions on the main unit and on the remote

control transmitter are virtually identical, with the exceptions

described below.

POWER

Display panel

Remote control sensor (p. 15)

POWER

switch (p. 6)

Disc tray (p. 6)

buttons (p. 6)

DISC SKIP

RANDOM button (p. 10)

PHONES

jack (p. 9)

REPEAT

button (p. 13)

LEVEL

control (p. 9)

OUTPUT

PROG

button (p. 11)

DIMMER button (p. 8)

button (p. 12)

CLEAR

OPEN/CLOSE

button (p. 6)

STOP

button (p. 7)

button (p. 6)

PLAYXCHANGE

button (p. 6)

PLAY

button (p. 7)

PAUSE

button (p. 8)

SKIP

button (p. 7)

select button (p. 6)

MODE

DISC

-select buttons (p. 6)

TIME

1 2345

SKIP

PROG

PLAYXCHANGE

OPEN/CLOSE

PLAY

STOP

DISC SKIP

CLEAR

REPEAT

RANDOM

OUTPUT LEVEL

DOWN UP

PHONES

DISC

MODE

DIMMER

PAUSE

Disc play

TIME

display mode

select button (p. 9)

DIMMER

TIME

OPEN/CLOSE

PROG

CLEAR

MODE

123

7890

PLAY

PAUSE

STOP

INDEX

OUTPUT LEVEL

–

RANDOM

SKIP

SYNCHRO

REPEAT

DISC SKIP

DISC

SCAN

Numeric buttons (p. 7)

INDEX button (p. 13)

SYNCHRO button (p. 14)

OUTPUT LEVEL buttons (p. 9)

(“+” is identical with “UP”

and “–” with “DOWN” of the

OUTPUT LEVEL control

on the main unit.)

DISC SCAN button (p. 8)

* ( ) indicates the page number on which the control part is best described.

This manual mainly describes how to operate this unit by

using the front panel buttons. To operate this unit on the

remote control transmitter, use buttons with the same name

as those on the front panel.

LOADING DISCS/DISC PLAY

Select the disc play mode (DISC MODE: SINGLE or

ALL) while watching the display.

“SINGLE” mode: The unit will play a designated disc only.

“ALL” mode: The unit will play all discs in the tray in

sequence.

* If necessary, select a desired disc by using a DISC-select

button or the DISC SKIP buttons.

Notes

●

After closing the disc tray by pressing the OPEN/CLOSE

button in the stop mode or after selecting any disc by using

the DISC SKIP buttons, the display shows the total number

of tracks and the total recorded time of the disc to be played

for a few seconds.

●

Additionally, you can close the disc tray by pressing the PLAY

button, a DISC-select button, a numeric button (on the remote

control transmitter) or the RANDOM button, or by pressing the

front edge of the disc tray gently. If the tray is closed in these

ways, play will begin automatically, however, the display will

not show the total number of tracks and the total recorded time

of the first disc to be played.

PLAYXCHANGE

During play, you can open the disc tray by pressing the

PLAYXCHANGE button without interrupting disc play.

However, in this case, pressing the DISC SKIP buttons has no

effect.

Note

You can load or replace discs on the trays when the disc tray

is opening, however, never load a disc on the tray hidden

inside the unit. In doing so, the disc and the unit may be

damaged, because the tray already has a disc, which is being

played.

2, 4

3, 6

POWER

OPEN/CLOSE

DISC SKIP

OPEN/CLOSE

MODE

PLAY

12345

DISC

DISC SKIP

PLAY

Shows the selected disc

mode.

Label side

upward

Disc tray

Load the fifth disc.

To play a desired track on the disc

English

To stop play temporarily

* To resume play, press the PAUSE button again or the

PLAY button.

To stop play completely

DIRECT PLAY

Select a desired track by using the numeric buttons on the

remote control transmitter.

Example: To select track 25

Press

➀

twice, then immediately press

➁

once.

* If a track number higher than the highest track number on

the disc is selected, the last track on the disc will be played.

SKIP PLAY

●

To play from the beginning of the track following the one

now playing

●

To play from the beginning of the track now playing

●

To play from the beginning of the track before the one now

playing

(twice)

* These operations can also be performed when the unit is in

the pause or stop mode.

Display information at disc play

➀

Encloses the tray number of the selected disc.

➁

Shows the tray numbers with discs.

➂

Shows the selected track number.

➃

Shows the time displays. (Refer to “Selecting time

displays” on page 9.)

➄

Displays the numbers that correspond to the numbers of

the tracks (as high as number 15) on the disc. After each

track is played, its corresponding number disappears so

the number of remaining tracks (and their numbers) can be

seen at a glance.

➅

Shows the level of signals output into an amplifier or the

headphone level adjusted by using the OUTPUT LEVEL

control.

PAUSE

STOP

SKIP

➀➁➂ ➃

➄

➅

The selected track

number is displayed.

➀

➁

To advance or reverse play rapidly (MANUAL SEARCH)

To advance rapidly

To reverse rapidly

●

The sound can be heard (although slightly garbled) during

manual search in either direction. This is convenient for

locating a precise position within a track, or for reviewing

the contents quickly.

●

Manual search can also be performed while disc play is

paused, though no sound will be heard.

(press and hold)

When the DISC SCAN button is pressed while this unit is

stopped, this unit will play an early part of each disc in turn.

Each disc is played for 8 seconds.

If, during this play, you hear a disc that you want to listen to in

entirely, press this button once again, or press the PLAY

button on the remote control transmitter. This will cancel this

play mode and the unit will enter into the normal play mode.

Notes

●

During this play, the disc tray numbers flash on and off on

the display. Every time the play of a disc is finished, the

corresponding tray number is changed from flashing to

lighting.

●

There may be a case that you can gain no sound with this

play, if the disc has a long blank space between tracks, for

example.

●

Durng this play, the setting of the disc play mode (MODE),

the program play mode, etc. are canceled temporarily.

Scanning discs to search for a desired disc (or to check discs on the disc tray)

You can select one of the three levels of brightness of the

display by pressing the DIMMER button.

Changing brightness of the display

DISC

SCAN

DIMMER

English

Note

The remaining time

➁

will not be displayed for track number

21 or higher.

Selecting time displays

You can select any of the four time displays by pressing the TIME display mode-select button.

When you listen with headphones

Connect the headphones to the PHONES jack and adjust the volume by using the OUTPUT LEVEL control. At that time, note

that this adjustment will also vary the level of the signal output to the amplifier.

PHONES

➀

Elapsed time of the track now playing

➁

Remaining time of the track now playing

➂

Total disc play time

➃

Total remaining time on the disc

OUTPUT LEVEL

–

OUTPUT LEVEL

DOWN UP

RANDOM-SEQUENCE PLAY

You can play the tracks in a random sequence (up to 99 tracks). The unit will automatically mix up tracks from all discs or any

desired disc in the disc tray.

Select whether to mix up tracks from one disc or all

discs in the tray.

* If the “SINGLE” disc play mode is selected, next select a

desired disc by using the DISC SKIP buttons or a DISC-

select button.

To cancel random-sequence play

Press the STOP button or RANDOM button once again, or

open the disc tray by pressing the OPEN/CLOSE button.

Notes

●

This feature will not function during programming, or during

programmed play.

●

If the POWER is switched off when the random-sequence

play mode is functioning, when the POWER is switched on

again, the unit will begin the random-sequence play

automatically. (This feature is available for timer play.)

●

If the SKIP button is pressed during random-sequence

play, the next randomly programmed track will be played. If

the SKIP button is pressed, play will return to the

beginning of the track now being played.

●

This indication appears while the unit is

mixing up tracks.

●

Total remaining time on the disc will not be displayed during

random-sequence play.

OPEN/CLOSE

MODE

RANDOM

English

PROGRAM PLAY

You can enjoy listening to your favorite tracks selected from one or several discs in any desired order using programmed play.

* The use of the remote control transmitter is recommended for easier operations.

➀

Shows the program number for the track to be set next.

➁

Shows the selected disc and track number.

➂

Shows the total time of the tracks currently programmed, if

tracks are selected from one disc only.

➃

Shows only the numbers of programmed tracks.

* If “P-01” does not appear in the display after the PROG

button is pressed, press the TIME display mode-select

button.

* If the total time reaches 100 minutes or more, only the last

two-digits will be displayed for the three-digit number.

STOP

PROG

DIMMER

TIME

OPEN/CLOSE

PROG

CLEAR

MODE

123

7890

PLAY

PAUSE

STOP

INDEX

OUTPUT LEVEL

–

RANDOM

SKIP

SYNCHRO

REPEAT

DISC SKIP

DISC

SCAN

DISC SKIP

PLAY

Stop the unit.

If necessary, select the desired disc.

Select the desired track.

When the programming is completed;

*Repeat step 3 and 4 to set more programs.

Display information during program play

➀

➁➂

➃

Notes

●

You can set as many as 20 programs at one time.

●

If you choose to perform programming with the DISC 1 tray

empty, be sure to press a DISC SKIP button before starting

programming.

●

The total time of the programed tracks will not be displayed,

if tracks are selected from more than one disc.

●

The total time of the programmed tracks will not be

displayed, if a track number higher than 20 is programmed.

●

If, during programming, the TIME display mode-select

button is pressed, the program number display can be

changed to display the total time of the programmed tracks.

To return to the previous display, press the TIME display

mode-select button once again.

●

The SKIP ( and ) button can be used during

playing, but only within the range of the programmed

tracks.

●

The SEARCH ( and ) button can be used during

playing to search through all tracks, including

unprogrammed tracks.

To select a track number on the front panel

Display a desired track number by pressing either side of the

SEARCH button. When the track number appears, press the

SKIP button once to input it.

To stop program play

●

Press the STOP button. The first track number

programmed will be displayed.

●

To resume play, press the PLAY button. Play will begin

from the beginning of the program.

To cancel a programmed setting

There are several methods, as described below.

●

Press the CLEAR button while the unit is stopped.

●

Press the STOP button while the unit is stopped.

●

Open the disc tray.

●

Switch off the power.

To check programmed data

1. If the unit is in the play mode, press the STOP button.

2. Press the PROG button.

3. Each time the SKIP button is pressed, the track

numbers and sequential order of the programmed tracks

can be checked one after another. The display of the track

number can be returned (sequentially in reverse order) by

pressing the SKIP button.

To correct programmed data

1. Follow the procedure described in “To check programmed

data”.

2. Display the track number to be corrected by pressing the

SKIP button.

3. Press a numeric button on the remote control transmitter to

select a track to replace the one displayed. The previously

programmed track will be cleared from the memory and

the new one will be programmed.

4. After the correction has been completed, press the PROG

button or PLAY button once again.

English

1 Select a track which has index numbers.

3 Select the desired index number.

To cancel the index search function

Press the INDEX button.

Notes

●

Not all discs have index numbers. The index system is a

method for sub-dividing tracks into smaller divisions (such

as, for example, the movements within classical

symphonies) for easier location of those parts. The liner

notes with the disc usually tell if such index numbers are

included.

●

If an index number is selected that is higher than any index

number on that disc, play will start from the last index

number point on the disc.

●

For some discs, play may begin slightly prior to the actual

designated index point.

●

If the disc has no encoded index points, play will begin from

the start of the selected track.

●

The index number can be designated only while “01

”

illuminated.

INDEX SEARCH

If the disc includes index numbers, play can be started from any desired index number.

REPEAT PLAY

You can play any desired track or disc (set of discs) repeatedly by pressing the REPEAT button. The repeat play mode will

change whenever you press the REPEAT button.

SINGLE REPEAT (S REP)

A single track is repeatedly played.

* This is also available in the programmed-play mode and the

random-sequence play mode. (If the repeat play mode is

switched off, the programmed-play mode or the random-

sequence play mode will be resumed.)

FULL REPEAT (F REP)

In the “SINGLE” disc play mode: A designated disc is

repeatedly played.

In the “ALL” disc play mode: All discs in the disc tray are

repeatedly played.

* In the programmed-play mode, all programmed tracks are

repeatedly played.

* In the random-sequence play mode, all randomly sequenced

tracks are repeatedly played in the same order.

(OFF)

S REP

FREP

REPEAT

INDEX

1 Select the disc.

2 Load a tape on the tape deck.

* To record from the beginning of the tape, rewind the

tape to the full end of the supply reel.

This unit enters into the pause mode, and the tape deck

enters into the REC/PAUSE mode.

* In this mode, the time display on this unit flashes on

and off.

4 If necessary, select the desired track.

Both CD play and tape deck recording begin.

* CD play begins a little later than recording

Notes

●

To finish or stop the recording, make proper operations on

the tape deck.

●

Programmed sequence of tracks can also be recorded with

this function, instead of recording an entire disc.

(Refer to page 11 for the programming procedure.)

This unit can make a tape deck’s recording synchronized with CD play automatically. With this function, you can record a CD on

tape very easily and more precisely.

This recording method needs a YAMAHA tape deck compatible with this function. (Refer to the tape deck’s operation manual to

know whether it is compatible or not.)

* This unit and the tape deck must be placed close to each other so that they can receive the signals from this unit’s remote control

transmitter at the same time.

CD SYNCHRONIZED RECORDING

DISC SKIP

SYNCHRO

PLAY

MODE

123

7890

PLAY

PAUSE

STOP

INDEX

OUTPUT LEVEL

–

SKIP

SYNCHRO

DISC SKIP

DISC

SCAN

SKIP

NOTES ABOUT HANDLING COMPACT DISCS

English

NOTES ABOUT THE REMOTE CONTROL TRANSMITTER

●

This compact-disc player is designed only for playing of

compact discs bearing the mark. Never attempt to

load any other type of disc into the unit.

The unit will also play 3-inch (8-cm) compact discs.

●

To remove a disc from its storage case, open the case and

then press down at the center; with a finger through the

center hole and the outer edges held as shown in the

illustration, lift the disc out carefully.

●

Always handle the disc with care so that its surface is not

scratched.

●

Compact discs are not subjected to wear during play, but

damage to the disc surface when the disc is being handled

can adversely affect the disc's play.

●

Compact discs are not affected by small particles of dust or

fingerprints on their playing surface, but even so they

should be kept clean. Wipe by using a clean, dry cloth. Do

not wipe with a circular motion; wipe straight outward from

the center.

●

Do not try to clean the disc’s surface by using any type of

disc cleaner, record spray, anti-static spray or liquid, or any

other chemical-based liquid, because such substances

might irreparably damage the disc’s surface.

●

Do not expose discs to direct sunlight, high temperature or

high humidity for a long period of time, because these might

warp or otherwise damage the disc.

To play a 3-inch (8-cm) CD

Place it in the inner recessed area of the disc tray. Do not put

a normal (5-inch/12-cm) CD on top of a 3-inch CD.

Battery installation

Battery replacement

If you find that the remote control transmitter must be used

closer to the main unit, the batteries are weak. Replace both

batteries with new ones.

Notes

●

Use only AA,R6,UM-3 batteries for replacement.

●

Be sure the polarities are correct. (See the illustration

inside the battery compartment.)

●

Remove the batteries if the remote control transmitter will

not be used for an extended period of time.

●

If batteries leak, dispose of them immediately. Avoid

touching the leaked material or letting it come in contact

with clothing, etc. Clean the battery compartment

thoroughly before installing new batteries.

Remote control transmitter operation range

Notes

●

There should be no large obstacles between the remote

control transmitter and the main unit.

●

If the remote control sensor is directly illuminated by strong

lighting (especially an inverter type of fluorescent lamp etc.),

it might cause the remote control transmitter to not work

correctly. In this case, reposition the main unit to avoid

direct lightening.

30°

NO!

Remote control

sensor

Within approximately

7 m (23 feet)

AUDIO SECTION

Frequency response ........................ 2 Hz – 20 kHz, ±0.5 dB

De-emphasis equalization ........................................ ±0.5 dB

Harmonic distortion+noise........................... 0.003% (1 kHz)

S/N ratio ...................................................................... 110 dB

Dynamic range ............................................................. 98 dB

Wow & flutter .................................................. Unmeasurable

Output voltage ................................................... 2±0.5V max.

Headphones output (–20 dB) ............ 200±40 mV/150 ohms

GENERAL

Power requirements

U.S.A. and Canada models ........................... 120V, 60 Hz

Australia and U.K. models ............................ 240V, 50 Hz

Europe model .................................................230V, 50 Hz

General model ..................... 110/120/220/240V, 50/60 Hz

Power consumption ....................................................... 20W

Dimensions (W x H x D) ..................... 435 x 107.5 x 387 mm

(17-1/8” x 4-1/4” x 15-1/4”)

Weight .................................................... 5.9 kg (13 lbs. 0 oz.)

Accessories ................................................. Connection cord

Remote control transmitter

Batteries (size AA, R6,UM-3)

Please note that all specifications are subject to change

without notice.

TROUBLESHOOTING

If the unit fails to operate normally, check the following points to determine whether the problem can be corrected by the simple

measures suggested. If it cannot, or if the problem is not listed in the SYMPTOM column, disconnect the unit's power cord and

contact your authorized YAMAHA dealer or service center for assistance.

SYMPTOM

The player does not switch ON when the

POWER switch is pressed.

The disc tray does not close completely.

A disc number does not illuminate in the

display.

Play does not begin.

Play is delayed, or begins at the wrong

place.

No sound.

Sound “skips”.

Sound “hums”.

Noise from a nearby tuner.

Noise from inside of the disc tray.

The remote control transmitter does not

work.

PROBABLE CAUSE

The power cord is not connected or not completely

connected.

A foreign object is obstructing the tray.

The disc has been loaded upside down.

The disc is damaged.

There is moisture on the laser pickup.

The disc has been loaded upside down.

The disc is dirty.

The disc may be scratched or damaged.

Improper output cable connections.

Improper amplifier operation.

The player is being subjected to vibrations or

impacts.

The disc is dirty.

Improper cable connections.

The tuner is too close to the player.

The disc may be warped.

The batteries of this remote control transmitter are

too weak.

Direct sunlight or lighting (of an inverter type of

fluorescent lamp etc.) is striking the remote control

sensor of the main unit.

REMEDY

Securely connect the power cord.

Carefully check the disc tray and remove the foreign

object.

Load the disc correctly.

Check the disc carefully; replace it if necessary.

Wait 20 to 30 minutes after switching the unit ON

before trying to play a disc.

Reload the disc with the label side up.

Clean the disc.

Check the disc carefully; replace it if necessary.

Connect the cables properly. If the problem

persists, the cables may be defective.

Set the amplifier controls to the correct input

selection.

Relocate the player.

Clean the disc.

Securely connect the audio cables. If the problem

persists, the cables may be defective.

Move the tuner and player farther apart.

Replace the disc.

Replace the batteries with new ones.

Change position of the main unit.

SPECIFICATIONS

YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.

YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA

YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY

YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE

YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND

YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN

YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA

VR05210

Yamaha CDC-645 Instrukcja obsługi

Marka: Yamaha

Model: CDC-645

Kategoria: Odtwarzacze CD

Typ: Instrukcja obsługi

ściągnij PDF

raport

w innych językach

čeština: Yamaha CDC-645 Návod k obsluze
español: Yamaha CDC-645 El manual del propietario
italiano: Yamaha CDC-645 Manuale del proprietario
Deutsch: Yamaha CDC-645 Bedienungsanleitung
svenska: Yamaha CDC-645 Bruksanvisning
português: Yamaha CDC-645 Manual do proprietário
français: Yamaha CDC-645 Le manuel du propriétaire
Türkçe: Yamaha CDC-645 El kitabı
English: Yamaha CDC-645 Owner's manual
dansk: Yamaha CDC-645 Brugervejledning
русский: Yamaha CDC-645 Инструкция по применению
suomi: Yamaha CDC-645 Omistajan opas
Nederlands: Yamaha CDC-645 de handleiding
română: Yamaha CDC-645 Manualul proprietarului

Powiązane dokumenty

Yamaha CDC-615 Instrukcja obsługi