Yamaha PSR-SX700 Digital Workstation Instrukcja obsługi

Typ
Instrukcja obsługi

Ten podręcznik jest również odpowiedni dla

EN
This Reference Manual explains advanced features of the PSR-SX900/SX700.
Please read the Owners Manual first, before reading this Reference Manual.
Reference Manual
Digital Workstation
2 PSR-SX900/SX700 Reference Manual
Contents
Function List 4
1 Styles 6
Style Types (Characteristics) ............................................................................................................................6
Registering Files to the Favorite Tab ................................................................................................................7
Changing the Chord Fingering Type .................................................................................................................8
Chord Types Recognized in the Fingered Mode...............................................................................................9
Using the Chord Tutor Function ......................................................................................................................10
Turning Each Channel of the Style On/Off ......................................................................................................11
Style Playback Related Settings .....................................................................................................................12
Adjusting the Tempo .......................................................................................................................................13
Recording a Chord Sequence when Style Playback is stopped (Chord Looper) (PSR-SX900) .....................14
Saving and Calling up Your Custom Chord Sequences (Chord Looper) (PSR-SX900) .................................15
Creating/Editing Styles (Style Creator)............................................................................................................18
2 Voices 32
Voice Part Setup Display.................................................................................................................................32
Voice Selection Display-related Settings.........................................................................................................34
Voice Types (Characteristics) .........................................................................................................................35
Registering Files to the Favorite Tab ..............................................................................................................36
Metronome Settings ........................................................................................................................................36
Keyboard/Joystick-related Settings .................................................................................................................37
Keyboard Part-related Settings (Voice Setting)...............................................................................................39
Transposing the Pitch in Semitones................................................................................................................40
Fine Tuning the Pitch of the Entire Instrument (Master Tune) ........................................................................41
Selecting or Creating a Temperament (Scale Tune).......................................................................................41
Making Detailed Settings for Harmony/Arpeggio ............................................................................................44
Editing Voices (Voice Edit) ..............................................................................................................................46
Editing Organ Flutes Voices (Voice Edit) ........................................................................................................50
3 Multi Pads 52
Creating a Multi Pad via MIDI (Multi Pad Creator—MIDI Multi Pad Recording)..............................................52
Creating a Multi Pad with Audio files (Multi Pad Creator—Audio Link Multi Pad) ...........................................54
Editing Multi Pads............................................................................................................................................56
4 Song Playback 57
Creating a Song List for Playback ...................................................................................................................57
Using Repeat Playback Mode .........................................................................................................................58
Editing Music Notation (Score) Settings..........................................................................................................59
Displaying Lyrics and Setting Up the Display..................................................................................................61
Displaying Text and Setting Up the Display ....................................................................................................62
Using the Auto Accompaniment Features with MIDI Song Playback..............................................................63
Turning Each Channel of a MIDI Song On/Off ................................................................................................64
Song Playback Related Settings .....................................................................................................................65
5 MIDI Song Recording/Editing 67
Overview of MIDI Song Recording ..................................................................................................................67
Recording Each Channel Individually (Realtime Recording)...........................................................................69
Re-recording a Specific Section—Punch In/Out (Realtime Recording) ..........................................................71
Recording Panel Setups to a Song .................................................................................................................73
Editing Channel Events of Existing Song Data ...............................................................................................74
Step Recording/Editing Songs (Step Edit) ......................................................................................................77
6 Registration Memory 86
Disabling Recall of Specific Items (Registration Freeze) ................................................................................86
Calling Up Registration Memory Numbers in Order (Registration Sequence) ................................................87
Searching for a Registration Memory Bank File..............................................................................................89
7 Playlist 91
Importing Music Finder Records to the Playlist ...............................................................................................91
8 Microphone 93
Making the Microphone or Guitar Settings (Mic Setting).................................................................................93
Editing the Vocal Harmony Type (Vocal Harmony) (PSR-SX900) ..................................................................96
Editing the Synth Vocoder Types (Vocal Harmony) (PSR-SX900) ...............................................................100
Contents
PSR-SX900/SX700 Reference Manual 3
9 Mixer 102
Editing Filter Parameters (Filter) ...................................................................................................................102
Editing EQ Parameters (EQ) .........................................................................................................................103
Editing Effect Parameters (Effect) .................................................................................................................105
Editing Effect Parameters (Chorus/Reverb) ..................................................................................................107
Editing Pan/Volume Settings (Pan/Volume)..................................................................................................107
Editing Master Compressor Settings (Compressor)......................................................................................108
Block Diagram ...............................................................................................................................................110
10 Controller Function Settings 111
Assigning Specific Functions to the Pedals and Panel Buttons (Assignable) ...............................................111
Editing the Assign Types of the Live Control Knobs (Live Control)...............................................................117
11 MIDI Settings 120
Basic Procedure for MIDI Settings ................................................................................................................120
System—MIDI System Settings ....................................................................................................................122
Transmit—MIDI Transmit Channel Settings..................................................................................................123
Receive—MIDI Receive Channel Settings....................................................................................................124
On Bass Note—Setting the Bass Note for Style Playback via MIDI..............................................................125
Chord Detect—Settings for Chords used in Style Playback via MIDI ...........................................................125
12 Network Settings 126
Wireless LAN Settings...................................................................................................................................126
Making the Time Settings..............................................................................................................................128
13 Utility 129
Speaker/Connectivity (PSR-SX900), Speaker (PSR-SX700) .......................................................................129
Touch Screen/Display ...................................................................................................................................130
Parameter Lock .............................................................................................................................................130
Storage—Formatting the Drive......................................................................................................................130
System ..........................................................................................................................................................131
Factory Reset/Backup ...................................................................................................................................132
14 Expansion Pack Related Operations 134
Installing Expansion Pack Data from a USB Flash Drive ..............................................................................134
Saving the Instrument Info File to a USB Flash Drive ...................................................................................135
Restoring the Pre-installed Expansion Contents...........................................................................................135
15 Connections 136
Selecting the Output Destination of Each Sound (Line Out) (PSR-SX900) ..................................................136
Index 138
The illustrations and LCD screens as shown in this manual are for instructional purposes only, and may appear somewhat different
from those on your instrument. Note that all display examples shown in this manual are in English.
Even though the example screens and illustrations pertain to the PSR-SX900, the usage is the same for the PSR-SX700.
The displays are taken from the PSR-SX900, and are in English.
The “Data List” and “Smart Device Connection Manual for iOS (iPhone/iPad Connection Manual)” documents can be downloaded
from the Yamaha website:
https://download.yamaha.com
The company names and product names in this manual are the trademarks or registered trademarks of their respective companies.
Using the PDF manual
• To quickly jump to items and topics of interest, click on the desired items in the “Bookmarks” index to the left of
the main display window. (Click the “Bookmarks” tab to open the index if it is not displayed.)
Click the page numbers that appear in this manual to go directly to the corresponding page.
• Select “Find” or “Search” from the Adobe Reader “Edit” menu and enter a keyword to locate related information in
the document. The names and positions of menu items may vary according to the version of Adobe Reader being
used.
The names and positions of menu items may vary according to the version of Adobe Reader being used.
NOTE
4 PSR-SX900/SX700 Reference Manual
Function List
This section simply and very briefly explains what you can do in the displays called up by pressing the buttons
on the panel, or by touching each icon on the Menu display.
For more information, refer to the page indicated below or the Owner’s Manual. The” mark indicates that the
function is described in the Owner’s Manual.
Displays accessible by the panel buttons
Menu display functions
Display Button to access Description Pages
Owner’s
Manual
Home
[DIRECT ACCESS] +
[EXIT]
Portal of the instrument’s display structure, which provides at-a-
glance information on all current settings.
-
Menu [MENU]
By touching each of the icons, you can call up the menus for the
various functions listed below.
-
Style Selection
STYLE category selection
buttons
For selecting Style files. -
Song Player SONG [PLAYER] For controlling Song playback. 57
Playlist [PLAYLIST] For selecting and editing Playlists, and managing your repertoire. 91
Song Recording SONG [RECORDING] For recording your performance. 68
Mixer [MIXER/EQ]
For adjusting the parameters of each part, such as volume, pan,
and EQ. It also allows you to adjust overall sound controls, such as
Master Compressor and Master EQ.
102
Voice Selection
PART SELECT [LEFT]–
[RIGHT 3], VOICE
category selection buttons
For assigning Voices to each of the keyboard parts. -
Multi Pad
Selection
MULTI PAD CONTROL
[SELECT]
For selecting Multi Pads. 56
Registration
Memory Bank
Selection
REGIST BANK SELECT
[-] and [+]
For selecting Registration Memory Banks. 87
Registration
Memory window
[MEMORY] For registering the current panel settings. -
Menu Description Pages
Owner’s
Manual
Channel On/Off For turning each channel of Style or MIDI Song on and off. 11, 64 -
Voice Part Setup
For confirming the current Voice settings, and making Voice-related settings such
as Effects.
32 -
Line Out (PSR-SX900)
Determines which jack is used to output each part and each drum & percussion
instrument.
136 -
Score For displaying the music notation (score) of the current MIDI Song. 59
Lyrics For displaying the lyrics of the current Song. 61
Text Viewer For displaying text files created on your computer. 62 -
Chord Looper (PSR-SX900) For recording a sequence of the chords and playing it back in a loop. 14, 15
Mic Setting For making microphone sound settings. 93
Vocal Harmony (PSR-SX900)
For adding Vocal Harmony effects to your singing. You can edit the Vocal
Harmony and save as your original harmony.
96, 100
Kbd Harmony/Arp
For adding the Harmony/Arpeggio effect to the right-hand section of the keyboard.
Parameters such as Harmony/Arpeggio type can be set.
44
Split & Fingering
For setting the Split Point or change the Chord Fingering type and Chord
Detection area.
8
Regist Sequence
Determines the order for calling up Registration Memory settings when using the
pedal.
87 -
Regist Freeze
Determines the item(s) that remain unchanged even when you call up panel
setups from the Registration Memory.
86 -
Tempo
For adjusting the tempo of MIDI Song, Style or Metronome. The same operation
as using the TEMPO [-]/[+] and [RESET/TAP TEMPO] buttons can be done on the
display.
13
PSR-SX900/SX700 Reference Manual 5
*1
This icon appears only when the Bluetooth function is included.
*2
This icon appears only when the optional USB Wireless LAN adaptor is connected.
Metronome For making settings of the metronome and the [RESET/TAP TEMPO] button. 36
Live Control Determines the functions assigned to the Live Control knobs. 117
Assignable
Determines the functions assigned to the pedals, assignable buttons, and the
shortcuts on the Home display.
111
Panel Lock
For locking the panel settings. When the panel settings are locked, the instrument
cannot be operated.
-
Demo For calling up the Demo display. -
Voice Edit
For editing the preset Voices to create your own Voices. The display differs
depending on whether an Organ Flutes Voice or another kind of Voice is selected.
46, 50 -
Style Creator
For creating a Style by editing the preset Style, or by recording Style channels
one by one.
18 -
Song Recording
For recording your performance. (This is same as the [RECORDING] button on
the panel.)
67
M.Pad Creator
For creating a Multi Pad by editing an existing preset Multi Pad, or by recording a
new one.
52, 54 -
Voice Setting
For making detailed settings of the keyboard parts, such as the pitch for each
part, Voice Set filter, and Arpeggio related settings.
39 -
Style Setting
For making Style playback related settings such as OTS Link timing, Dynamics
Control, etc.
12 -
Song Setting
For making Song playback related settings such as Guide function, Channel
settings, etc.
65 -
Chord Tutor Indicates how to play chords that correspond to the specified chord names. 10 -
Scale Tune For setting the scale type. 41 -
Master Tune For fine-tuning the pitch of the entire instrument. 41 -
Transpose
For transposing the pitch of the entire sound in semitones, or just the sound of the
keyboard or MIDI Song.
40
Keyboard/Joystick Determines the Touch Response of the keyboard and Joystick-related settings. 37 -
Expansion
For installing Expansion Packs for adding extra contents downloaded from the
website or created on your own by using the Yamaha Expansion Manager, or
restoring the pre-installed Expansion Contents.
134 -
MIDI For making MIDI-related settings. 120 -
Utility
For making global settings, managing the USB flash drives, initializing the
instrument to the factory default, or backing up the data stored in the instrument,
etc.
12
9
Bluet
ooth
*1
(PSR-SX900) For making settings for connecting the instrument to a Bluetooth-equipped device. -
Time
*2
For making settings of the time shown on the Home display. 128 -
Wireless LAN
*2
For making settings for connecting the instrument to a computer or a smart device
such as iPad via the wireless LAN function.
126 -
Menu Description Pages
Owner’s
Manual
6 PSR-SX900/SX700 Reference Manual
1
1
Styles
Contents
Style Types (Characteristics) ...............................................................................................................................6
Registering Files to the Favorite Tab...................................................................................................................7
• Removing Files from the Favorite Tab ............................................................................................................7
Changing the Chord Fingering Type ..................................................................................................................8
Chord Types Recognized in the Fingered Mode ................................................................................................9
Using the Chord Tutor Function .......................................................................................................................10
Turning Each Channel of the Style On/Off ......................................................................................................11
Style Playback Related Settings.........................................................................................................................12
• Setting............................................................................................................................................................12
• Change Behavior ...........................................................................................................................................13
Adjusting the Tempo...........................................................................................................................................13
Recording a Chord Sequence when Style Playback is stopped (Chord Looper) (PSR-SX900) ..................14
Saving and Calling up Your Custom Chord Sequences (Chord Looper) (PSR-SX900) ..............................15
• Memorizing the Recorded Chord Looper Data .............................................................................................15
• Saving the Recorded Data as a Bank File......................................................................................................16
• Recalling the Chord Looper Bank File and Playing Back a Style with a Chord Sequence ..........................16
• Editing the Chord Looper Bank (Export, Import, Clear) ..............................................................................17
Creating/Editing Styles (Style Creator) ............................................................................................................18
• Style Data Structure—Consisting of Source Patterns ...................................................................................18
• Basic Procedure for Creating a Style.............................................................................................................19
• Realtime Recording .......................................................................................................................................20
• Step Recording ..............................................................................................................................................23
• Assembly—Assigning the Source Pattern to Each Channel .........................................................................24
• Channel Edit ..................................................................................................................................................24
• SFF Edit—Making Style File Format Settings..............................................................................................26
• Editing the Rhythm Part of a Style (Drum Setup).........................................................................................30
The particular type of Style is indicated the upper left of the Style name in the
Style Selection display. The defining characteristics of these Styles and their
performance advantages are described below.
Style Types (Characteristics)
Session For information on these types, refer to “Style Characteristics” in the Owner’s Manual.
Free Play
DJ
+Audio (PSR-SX900) The Audio Styles (+Audio) have been specially produced by adding audio recordings of studio
musicians playing in various recording studios worldwide. This adds exceptionally natural feel,
ambience and warmth to the drums and percussion of the Style, giving your performance greater
expressive potential. Specifically, it retains the subtle nuances and grooves that are difficult to
reproduce using the preset drum/percussion kit. Yamaha Time Stretch Technology allows the audio
to follow your tempo changes without changing pitch, so everything stays in perfect sync.
Audio Styles can be played back and controlled by this instrument; however, by default the data is
not included on this instrument. Audio Styles or Expansion Packs that contain Audio Styles may be
available at the Yamaha website.
If the tempo is set to over 160% of the default, the audio part is muted.
Keep in mind that the Audio Styles may take more time to load than others, and that they may have certain restrictions and
differ in the specific functions that can be handled.
NOTE
PSR-SX900/SX700 Reference Manual 7
1
Styles
You can call up your favorite or often used preset Styles or Voices quickly by registering them to the Favorite tab on
the File Selection display.
1 In the File Selection display, select the desired category in the Preset tab.
2 Touch (File) to call up the “File Edit” window.
3 Touch [Favorite] to call up the display for selecting the files.
4 Select the desired files for registering to the Favorite tab.
5 Touch [Favorite] to actually register the files to the Favorite tab.
The selected files are shown on the Favorite tab.
Removing Files from the Favorite Tab
1 In the Favorite tab of the File Selection display, touch (File) to call up the “File Edit”
window.
2 Touch [Favorite] to call up the display for selecting the files.
3 Select the files which you want to remove from the Favorite tab.
4 Touch [Clear] to actually remove the files from the Favorite tab.
Registering Files to the Favorite Tab
2
3
5
4
Favorite tab
4
3
8 PSR-SX900/SX700 Reference Manual
The Chord Fingering type determines how chords are specified for Style Playback. You can select the desired type on
the display called up via [MENU] [Split & Fingering].
Changing the Chord Fingering Type
Single Finger Makes it simple to produce orchestrated accompaniment using major, seventh, minor and minor-
seventh chords by pressing only one, two or three keys on the Chord section of the keyboard.
Multi Finger Automatically detects Single Finger or Fingered chord fingerings, so you can use either type of fin-
gering without having to switch fingering types.
Fingered Lets you specify the chord by pressing the notes making up a chord in the left hand section of the
keyboard when ACMP is turned on or the Left part is turned on. For information on which notes to
press for each chord, refer to the Data List (Chord Types Recognized in the Fingered Mode) down-
loadable from Yamaha Manual Library, or use the Chord Tutor function as described in the next
section.
Fingered On Bass Accepts the same fingerings as Fingered; however, the lowest note played in the Chord section of
the keyboard is used as the bass note, allowing you to play “on bass” chords. (In the Fingered type,
the root of the chord is always used as the bass note.)
Full Keyboard Detects chords in the entire key range. Chords are detected in a way similar to Fingered, even if you
split the notes between your left and right hands—for example, playing a bass note with your left
hand and a chord with your right, or by playing a chord with your left hand and a melody note with
your right.
AI Fingered Basically the same as Fingered, with the exception that less than three notes can be played to indi-
cate the chords (based on the previously played chord, etc.).
AI Full Keyboard This type is similar to Full Keyboard, with the exception that less than three notes can be played to
indicate the chords (based on the previously played chord, etc.). 9th, 11th and 13th chords cannot
be played.
“AI” stands for “Artificial Intelligence.”
When the chord detection area is set to “Upper,” only “Fingered*” is available. This type is basically same as “Fingered,” except that “1+5,” “1+8” and Chord Cancel are
not available.
Cm
C
Cm
7
C
7
Major chord
Press the root key only.
Minor chord
Simultaneously press
the root key and a black
key to its left.
Seventh chord
Simultaneously press the
root key and a while key to
its left.
Minor Seventh chord
Simultaneously press the root
key and both a white and black
key to its left.
PSR-SX900/SX700 Reference Manual 9
1
Styles
• Notes in parentheses can be omitted.
Chord Types Recognized in the Fingered Mode
Chord Name [Abbreviation] Normal Voicing Display for root “C”
1+8 1+8 C1+8
1+5 1+5 C1+5
Major [M] 1+3+5 C
Sixth [6] 1+(3)+5+6 C6
Major seventh [M7] 1+3+(5)+7 CM7
Major seventh flatted fifth [M7b5] 1+3+b5+7 CM7(b5)
Major seventh add sharp eleventh [M7(#11)] 1+(2)+3+#4+5+7 CM7(#11)
Add ninth [(9)] 1+2+3+5 Cadd9
Major seventh ninth [M7_9] 1+2+3+(5)+7 CM7(9)
Sixth ninth [6_9] 1+2+3+(5)+6 C6(9)
Flatted fifth [(b5)] 1+3+b5Cb5
Augmented [aug] 1+3+#5Caug
Seventh augmented [7aug] 1+3+#5+b7 C7aug
Major seventh augmented [M7aug] 1+(3)+#5+7 CM7aug
Minor [m] 1+b3+5 Cm
Minor sixth [m6] 1+b3+5+6 Cm6
Minor seventh [m7] 1+b3+(5)+b7Cm7
Minor seventh flatted fifth [m7b5] 1+b3+b5+b7Cm7(b5)
Minor add ninth [m(9)] 1+2+b3+5 Cm add9
Minor seventh ninth [m7(9)] 1+2+b3+(5)+b7 Cm7(9)
Minor seventh eleventh [m7(11)] 1+(2)+b3+4+5+(b7) Cm7(11)
Minor major seventh flatted fifth [mM7b5] 1+b3+b5+7 CmM7(b5)
Minor major seventh [mM7] 1+b3+(5)+7 CmM7
Minor major seventh ninth [mM7(9)] 1+2+b3+(5)+7 CmM7(9)
Diminished [dim] 1+b3+b5Cdim
Diminished seventh [dim7] 1+b3+b5+6 Cdim7
Seventh [7] 1+3+(5)+b7C7
Seventh suspended fourth [7sus4] 1+4+5+b7C7sus4
Seventh ninth [7(9)] 1+2+3+(5)+b7 C7(9)
Seventh add sharp eleventh [7(#11)] 1+(2)+3+#4+5+b7C7(#11)
Seventh add thirteenth [7(13)] 1+3+(5)+6+b7 C7(13)
Seventh flatted fifth [7b5] 1+3+b5+b7C7(b5)
Seventh flatted ninth [7(b9)] 1+b2+3+(5)+b7C7(b9)
Seventh add flatted thirteenth [7(b13)] 1+3+5+b6+b7C7(b13)
Seventh sharp ninth [7(#9)] 1+#2+3+(5)+b7C7(#9)
Suspended fourth [sus4] 1+4+5 Csus4
One plus two plus five [sus2] 1+2+5 Csus2
cancel 1+b2+2 Cancel
10 PSR-SX900/SX700 Reference Manual
The Chord Tutor function lets you can see which notes to press for specifying the chord. If you know a chord name but
don’t know how to play it, use this function.
This function can be used on the display called up via [MENU] [Chord Tutor].
The notes you need to play are shown in the display.
Using the Chord Tutor Function
Root Lets you select the desired chord root.
Type Lets you select the desired chord type.
Although this function shows how to play a chord only in case of “Fingered,” the indication is useful also when a type other than “Single Finger” is selected.
Depending on the chord, some notes will be omitted.
PSR-SX900/SX700 Reference Manual 11
1
Styles
You can add variations and change the feeling of a Style by selectively turning channels on/off as the Style plays.
Style channels can be turned on or off on the display called up via [MENU] [Channel On/Off].
If you want to play back only one particular channel (solo playback), touch and hold the desired channel name until it
turns purple. To cancel solo, simply touch the (purple) channel name again.
Turning Each Channel of the Style On/Off
Style channels
Each Style contains the channels listed below.
Rhythm 1/2: These are the basic parts of the Style, containing the drum and percussion rhythm patterns.
Bass: The bass part uses various appropriate instrument sounds to match the Style.
Chord 1/2: These parts are for rhythmic chord backing, commonly consisting of piano or guitar Voices.
Pad: This part is used for sustained instruments such as strings, organ, choir, etc.
Phrase 1/2: These parts are used for punchy brass stabs, arpeggiated chords, and other extras that make the accom-
paniment more interesting.
(PSR-SX900)
Audio: This is an audio part of the Audio Style.
You can also turn the channels on/off on the Mixer display.
To change the Voice for each channel:
Touch the instrument icon below the desired channel to call up the Voice Selection display, then select the desired
Voice.
You can save the settings here to Registration Memory. For details, refer to the Owner’s Manual.
NOTE
(PSR-SX900) The Voice of the Audio part of the Audio Style cannot be changed.
NOTE
NOTE
12 PSR-SX900/SX700 Reference Manual
You can make a variety of settings for Style Playback, on the display called up via [MENU] [Style Setting].
Setting
Style Playback Related Settings
Dynamics Control This determines how the Style playback volume changes depending on the playing strength.
Off: The volume is kept the same regardless of playing strength.
Narrow: The volume changes over a narrow range.
Medium: The volume changes over a medium range.
Wide: The volume changes over a wide range.
Display Tempo Turns the tempo indication on or off for each Style on the Style Selection display.
Stop ACMP When the [ACMP] button is turned on and the [SYNC START] button is off, you can play chords in
the chord section of the keyboard with the Style stopped, and still hear the accompaniment chord.
In this condition—called “Stop Accompaniment”—any valid chord fingerings are recognized and
the chord root/type are shown in the Style area of the Home display. Here, you can determine
whether the chord played in the chord section will sound or not in the Stop Accompaniment status.
Off: The chord played in the chord section will not sound.
Style: The chord played in the chord section will sound via the Voices for the Pad channel and the
Bass channel of the selected Style.
Fixed: The chord played in the chord section will sound via the specified Pad/Bass channels’
Voices, regardless of the selected Style.
OTS Link Timing This applies to the OTS Link function. This parameter determines the timing in which the One
Touch Settings change with the MAIN VARIATION [A]–[D] change. (The [OTS LINK] button
must be on.)
Real Time: One Touch Setting is immediately called up when you press a MAIN VARIATION
button.
Next Bar: One Touch Setting is called up at the next measure, after you press a MAIN VARIA-
TION button.
Synchro Stop Window This determines how long you can hold a chord before the Synchro Stop function is automatically
cancelled. When the [SYNC STOP] button is turned on and this is set to a value other than “Off,
the Synchro Stop function is automatically cancelled if you hold a chord for longer than the time set
here. This conveniently resets Style playback control to normal, letting you release the keys and
still have the Style play. In other words, if you release the keys more quickly than the time set here,
the Synchro Stop function works.
When the selected Style contains MegaVoices, unexpected sounds may result when this is set to “Style.”
NOTE
When you record a Song, the chord detected by playing the Stop Accompaniment can be recorded regardless of the setting
here. Please note that both the sounding Voice and chord data is recorded when set to “Style,” and only the chord data is
recorded when set to “Off” or “Fixed.”
NOTE
PSR-SX900/SX700 Reference Manual 13
1
Styles
Change Behavior
You can adjust the tempo of Style, MIDI Song and metronome, on the display called up via [MENU] [Tempo].
Multi Pad Synchro Stop
(Style Stop)
Determines whether or not the repeat playback of a Multi Pad stops when Style playback is
stopped.
Multi Pad Synchro Stop
(Style Ending)
Determines whether or not the repeat playback of a Multi Pad stops when the Ending section of
Style is played back.
Section Set Determines the default section that is automatically called up when selecting different Styles (when
Style playback is stopped). When set to “Off” and Style playback is stopped, the active section is
maintained even if a different Style is selected. When any of the MAIN A–D sections are not
included in the Style data, the nearest section is automatically selected. For example, when MAIN
D is not contained in the selected Style, MAIN C will be called up.
Tempo This determines whether the tempo changes or not when you change the Style.
Lock: Regardless of playback status, the tempo setting of the previous Style is maintained.
Hold: While the Style is playing back, the tempo setting of the previous Style is maintained.
While the Style is stopped, the tempo changes to that of the default tempo of the selected Style.
Reset: Regardless of playback status, the tempo changes to that of the default tempo for the
selected Style.
Part On/Off This determines whether the Style Channel on/off status changes or not when you change the Style.
Lock: Regardless of playback status, the Channel on/off status of the previous Style is main-
tained.
Hold: While the Style is playing back, the Channel on/off status of the previous Style is main-
tained. While the Style is stopped, all Channels of the selected Style are set to on.
Reset: Regardless of playback status, all Channels of the selected Style are set to on.
Adjusting the Tempo
q
Indicates the tempo value during playback of the metronome, Style and MIDI Song. The tempo can be changed by using
the Data dial, the [DEC]/[INC] buttons or the TEMPO [-]/[+] buttons.
w
Allows you to change the tempo by tapping this twice at the desired tempo. (Equivalent to the [RESET/TAP TEMPO] but-
ton when the “Style Section Reset” setting (page 36) is off.)
e
Indicates the tempo value of the current MIDI Song. The Song will be started at this tempo.
r
Indicates the tempo value of the current Style. The Style will be started at this tempo.
The tempo value of an Audio Song is set via the Time Stretch function. Refer to the Owner’s Manual.
w
q
e
r
(PSR-SX900) When you select an Audio Style (page 6), the upper limit of the tempo will be shown below the tempo value in this way: Audio: ** max. The
Audio part is muted if the tempo is over the upper limit.
NOTE
NOTE
14 PSR-SX900/SX700 Reference Manual
You can start recording and playing back a chord sequence when Style playback is stopped, using SYNC START. By
recording this way, you can adjust the start timing to exactly the first beat of the measure.
1 While Style playback is stopped, press the CHORD LOOPER [REC/STOP] button.
The [REC/STOP] button flashes to indicate the Chord Looper function is on standby to record, and the STYLE
CONTROL [SYNC START] button is automatically turned on.
2 Enter the chords on the keyboard according to the playback tempo of the Style.
Recording and Style playback starts simultaneously. The chord sequence is recorded until you stop recording in
step 3.
3 Press the STYLE CONTROL [START/STOP] button to stop recording and Style playback.
Recording stops, and the CHORD LOOPER [ON/OFF] button lights in blue to indicate the data is already
recorded.
Recording a Chord Sequence when Style Playback is stopped (Chord
Looper) (PSR-SX900)
When [REC/STOP] is turned on, the [ACMP] button is also turned on automatically.
You can also stop recording by pressing the CHORD LOOPER [REC/STOP] button. In this case, only the recording stops, while Style playback will continue.
The latest chord sequence data you recorded is maintained unless you turn the power off or select a Chord Looper Memory number which contains
data. If you want to save the data, see page 15.
NOTE
NOTE
PSR-SX900/SX700 Reference Manual 15
1
Styles
On the Chord Looper display, you can memorize the recorded chord sequence of the Chord Looper function to one of
the eight memories for easy recall. You can save all eight memorized data slots as a single Chord Looper Bank (*.clb)
file or export a single memory as a Chord Looper Data (*.cld) file.
Operation display is called up via: [MENU] [Chord Looper].
This section covers how to memorize, save/recall, and export/import the recorded data.
Memorizing the Recorded Chord Looper Data
1 Record the desired chord sequence.
For details on recording the chord sequence, see page 14 or refer to the Owner’s Manual.
2 Touch [Memory] on the Chord Looper display.
A guidance message appears on the display.
3 Touch the desired number to memorize.
The data is memorized, and the content of the memorized data is shown on the corresponding area.
Saving and Calling up Your Custom Chord Sequences (Chord Looper)
(PSR-SX900)
If you turn the power off at this point, the Memory will be cleared. To save the memorized data as a file, see pages 16 and 17.
1234
5678
Data Structure on the Chord Looper display
Chord Looper Bank
(*.clb) file
Load[Save]
[Export]
Chord Looper Bank
[Import]
[Clear]
Chord Looper Data
(*.cld) file
Load
(Touch memory number to select)
Memorize
[Memory]
Current Chord Looper
data (not displayed)
Recording
[Rec/Stop]
Loop Playback
[On/Off]
2
3
Same as the CHORD LOOPER
[REC/STOP] and [ON/OFF] buttons.
NOTICE
16 PSR-SX900/SX700 Reference Manual
Saving the Recorded Data as a Bank File
The eight memorized chord sequences are can be saved as a single Chord Looper Bank (*.clb) file.
1 Record the desired chord sequence, and then memorize to the number [1]–[8].
To record the chord sequence, see page 14 or refer to the Owner’s Manual.
To memorize the recorded data, see page 15.
2 Touch (Save) to save the data in the Chord Looper Memory [1]–[8] as a single Bank
file.
Recalling the Chord Looper Bank File and Playing Back a Style with a
Chord Sequence
1 Select a Style.
2 Load the Chord Looper Bank name to call up the Chord Looper Bank Selection display,
and then select the desired Bank.
3 Touch the Chord Looper Memory number you wish to use first.
If you select a Chord Looper Bank file before saving the edited data, the data will be lost.
Each Chord Looper Memory is named automatically such as “CLD_001,” but it can be renamed by exporting the file and import it (page 17).
Touch [On/Off] to turn it on here, if you want to start automatic Style playback from the beginning of your performance.
1
2
NOTICE
NOTE
2
3
Same as the CHORD LOOPER
[REC/STOP] and [ON/OFF] buttons.
Chord Looper Bank file name
NOTE
NEXT PAGE
PSR-SX900/SX700 Reference Manual 17
1
Styles
4 Start playback of the Style and play along with it.
5 Turn on [On/Off] just before the measure you want to start loop playback of the chord
sequence.
[On/Off] flashes to indicate loop playback is in standby. On the next measure of the Style, [On/Off] is turned on
and the chord sequence will be played back in a loop.
6 As necessary, change the Chord Looper Memory number.
To change the Memory number, touch the desired number. The chord sequence changes on the next measure of the
Style.
7 Touch [On/Off] to stop loop playback.
The playback of the chord sequence is immediately stopped, and the Style will return to normal playback.
Editing the Chord Looper Bank (Export, Import, Clear)
Each Chord Looper Memory number contained in the Chord Looper Memory Bank can be edited (cleared, imported,
and exported) one by one. The Memory data is exported/imported as a Chord Looper Data (*.cld) file.
1 Touch the desired operation: [Clear], [Import] or [Export].
Follow the onscreen instructions. To cancel the operation at this point, simply touch an empty area of the display.
2 Touch the desired memory number, and then execute the action selected in the step 1
as below.
3 As necessary, touch (Save) to save the edited Chord Looper Bank as a new file.
During loop playback, [On/Off] lights (and the CHORD LOOPER [ON/OFF] lights in orange), and the [ACMP] button flashes. In this condition, the chord input from
the keyboard is disabled, and the whole keyboard can be used for performance.
If you want to clear all data shown in the Chord Looper display, touch (New) to create the new Bank.
Clear A Confirmation message appears. Touch [Yes] to execute clear.
Import The File Selection display is called up. Touch the desired file to import, and then touch
or press the [EXIT] button to return.
Export The File Selection display is called up to export. Touch [Export] on the display, enter the file
name, and then touch [OK].
The file name is entered automatically, but you can rename it when saving.
If you select a Chord Looper Bank file before saving the edited data, the data will be lost.
NOTE
NOTE
2
1
NOTICE
18 PSR-SX900/SX700 Reference Manual
The Style Creator function lets you create your original Style by recording the rhythm pattern via the keyboard and
using already-recorded Style data. Basically, select a preset Style that is closest to the type you want to create, then
record the rhythm pattern, bass line, chord backing, or phrase (referred to as “Source Pattern” in the Style Creator) for
each channel of each Section.
Style Data Structure—Consisting of Source Patterns
A Style is made up of different Sections (Intro, Main, Ending, etc.) and each Section has eight separate channels, each
of which is referred to as a “Source Pattern.” With the Style Creator feature, you can create a Style by separately
recording the Source Pattern for each channel, or by importing pattern data from other existing Styles.
Creating/Editing Styles (Style Creator)
(PSR-SX900) Limitations on the Audio part:
If you select an Audio Style as starting data, the Audio part will be used as is. The Audio part cannot be deleted,
edited or created from scratch.
The created Style containing the Audio part can be used only via an instrument that supports Audio Styles as well
as the SFF GE format.
The Audio part cannot be copied from another Style or Section in the “Assembly” display (page 24). If you want to
use a specific Audio part, make sure to select the corresponding Audio Style before calling up the Style Creator
display.
Phrase 2
Phrase 1
Pad
Chord 2
Chord 1
Bass
Rhythm 2
Rhythm 1
Audio Part
Recording or copying from another Style
Recording or copying from another Style
Recording or copying from another Style
Recording or copying from another Style
Recording or copying from another Style
Recording or copying from another Style
Recording or copying from another Style
Recording or copying from another Style
(Only for PSR-SX900)
Used as is when selecting an Audio Style as starting
data. This cannot be edited or deleted.
Main A
Main B
Fill In
Intro
Ending 2
Ending 3
Creating a Source Pattern
for each channel separately
PSR-SX900/SX700 Reference Manual 19
1
Styles
Basic Procedure for Creating a Style
1 Select the desired Style to be used as the basis for the new Style.
2 Call up the Style Creator display via [MENU] [Style Creator].
3 On the “Basic” display, select the desired Section.
As necessary, make the following settings.
If you want to create a Style entirely from scratch, touch [Initialize Style] to make the current Style empty.
If you initialize the Style, set the “Pattern Length” (measure amount of the Source Pattern). After inputting the
value, touch [Execute] to actually enter the changes.
Set the overall parameters such as “Tempo” and “Time Signature.” The settings here commonly applies to all
Sections. After setting the Time Signature, touch [Execute] to actually enter the changes.
4 Create the Source Pattern for each channel.
Realtime Recording (page 20)
Lets you record the Style by simply playing the keyboard.
Step Recording (page 23)
Lets you enter each note individually.
•Style Assembly (page 24)
Lets you copy various patterns from other preset Styles or Styles you have already created.
5 Edit the already recorded channel data.
Channel Edit (page 24)
Lets you edit the MIDI data of the already recorded channels.
•SFF Edit (page 26)
Lets you edit the SFF (Style File Format) related parameters of already recorded channels other than Rhythm
channels.
Drum Setup (page 30)
Lets you edit the rhythm part of the Style, such as changing the sounds of the individual instruments.
6 Repeat steps 3–5 as desired.
7 Touch (Save) to save the created Style.
You can also select the Section by pressing one of the corresponding STYLE CONTROL buttons on the panel.
(PSR-SX900) If an Audio Style is selected as starting data, changing the pattern length deletes the corresponding Audio part.
NOTE
NOTE
The created Style will be lost if
you change to another Style or
turn off the power to the instru-
ment without carrying out the
Save operation.
NOTICE
20 PSR-SX900/SX700 Reference Manual
Realtime Recording
The explanations here apply to step 4 of the Basic Procedure on page 19. In the “Rec Channel” display, you can create
the channel data via Realtime Recording.
Recording Rhythm Channels 1–2
1 On the “Rec Channel” display, touch and hold the desired channel until it turns red.
The selected channel becomes the Recording target no matter whether the channel already contains data or not. If
recorded data is already included, you should record the additional notes to the selected channel as Overdub
Recording.
2 If necessary, select a Voice, and then practice the rhythm pattern to be recorded.
Touch the instrument icon (illustration) to call up the Voice Selection display then select the desired Voice such as
a Drum Kit. After selecting, close the Voice Selection display to return to the Style Creator display. With the
selected Voice, practice the rhythm pattern to be recorded.
Realtime Recording Characteristics in the Style Creator
Loop Recording
Style playback repeats the rhythm patterns of several measures in a “loop,” and Style recording is also done using
loops. For example, if you start recording with a two-measure Main section, the two measures are repeatedly
recorded. Notes that you record will play back from the next repetition (loop), letting you record while hearing
previously recorded material.
Overdub Recording
This method records new material to a channel already containing recorded data, without deleting the original data.
In Style recording, the recorded data is not deleted, except when using functions such as “Clear Drum Inst”
(page 21) “Delete” (pages 21, 23) and “Remove Event” (page 25). For example, if you start recording with a two-
measure Main section, the two measures are repeated many times. Notes that you record will play back from the
next repetition, letting you overdub new material to the loop while hearing previously recorded material. When
creating a Style based on an existing internal Style, overdub recording is applied only to the rhythm channels. For
all other channels (except rhythm), you need to delete the original data before recording.
(PSR-SX900) If you select an Audio Style as starting data:
Playback of the Audio part can be turned on or off, but it cannot be edited or deleted. Note that the rhythm pattern of
this part will be used in the new Style you intend to create. If you want to create a rhythm phrase in addition to the
Audio part, follow the steps below.
2
1
(PSR-SX900) Turns playback
of Audio Part on/off
NEXT PAGE
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139

Yamaha PSR-SX700 Digital Workstation Instrukcja obsługi

Typ
Instrukcja obsługi
Ten podręcznik jest również odpowiedni dla